Productdetails | HELUKABEL SOUTH AFRICA

Back to overview

Power cable, 0,6/1 kV, with concentric copper conductor, VDE approved

Technical data

Power and control cable
acc. to DIN VDE 0276-603 /
HD 603 S1 / IEC 60502
Temperature range
flexing -5°C to +50°C
fixed installation -40°C to +70°C
Permissible operating temperature
at conductor +70°C
Permissible short circuit temperature
(short circuit duration max. 5 s)
+160°C
Nominal voltage
U₀/U 0,6/1 kV
Test voltage
4 kV
Max. permissible tensile stress
with cable grip at conductor
50 N/mm²
Minimum bending radius
12x cable Ø
Current carrying capacity
see "Technical Information"
Caloric load values
see "Technical Information"

Cable structure

Bare copper conductor,
single wire or multi wire
acc. to DIN VDE 0295 cl.1 or cl.2 /
BS 6360 cl.1 or cl.2 / IEC 60228 cl.1 or cl.2
Core insulation of PVC
compound type DIV4
acc. to HD 603 S1
Core identification
acc. to DIN VDE 0293-308
Cores concentrically stranded
Filling compound
Concentric conductor (Ceander),
inner layer of corrugated copper wires,
outer layer with copper tape
Outer sheath of PVC
compound type DMV5
acc. to HD 603 S1
Sheath colour. black

Note

re = round conductor, single-wire
rm = round conductor, multi-wire
sm = sectional conductor, multi-wire
Available with outer sheath in alternative
colours on request
AWG sizes are approximate equivalent
values. The actual cross section is in mm².

Application

Power cables for energy supply are used for industry and distribution boards, power stations, house connecting boxes and street lighting as well as control cable for the transmission of control impulses and test datas. Overall, where increased electrical and also mechanical protection are required. Those cables are installed in open air, in underground, in water, in concrete, indoors and in cable ducts. The concentric conductor (C) is allowed to use as PE-, PEN-conductor or as screen. The corrugated design (Ceander) of the concentric conductor permits any number of cable junctions during assembly, without any conductors having to be cut. This ensures a optimal reliability.
CE = Product conforms with Low-Voltage Directive 2014/35/EU.

Downloads

Data sheet
Certificate of compliance

Part no.	No.cores x cross-sec. mm²		Outer Ø app. mm	Cop. weight kg / km	Weight app. kg / km	AWG-No.
32260	2 x 10	re / 10	19,0	312,0	650,0	8
32261	2 x 16	re / 16	21,0	489,0	850,0	6
32262	2 x 25	rm / 25	24,0	763,0	1210,0	4
32263	3 x 10	re / 10	19,5	408,0	730,0	8
32264	3 x 16	re / 16	22,0	643,0	1000,0	6
32265	3 x 25	rm / 16	26,0	902,0	1550,0	4
32274	3 x 25	rm / 25	26,0	1003,0	1600,0	4
32266	3 x 35	sm / 16	27,0	1190,0	1750,0	2
32275	3 x 35	sm / 35	27,5	1402,0	1850,0	2
32267	3 x 50	sm / 25	29,5	1723,0	2250,0	1
32276	3 x 50	sm / 50	29,5	2000,0	2450,0	1
32268	3 x 70	sm / 35	33,0	2410,0	2950,0	2/0
32277	3 x 70	sm / 70	34,0	2796,0	3350,0	2/0
32269	3 x 95	sm / 50	38,0	3296,0	4100,0	3/0
32278	3 x 95	sm / 95	38,5	3791,0	4550,0	3/0
32270	3 x 120	sm / 70	41,0	4236,0	5050,0	4/0
32279	3 x 120	sm / 120	42,0	4786,0	5550,0	4/0
32271	3 x 150	sm / 70	45,0	5100,0	6000,0	300 kcmil
32280	3 x 150	sm / 150	46,0	5970,0	6900,0	300 kcmil
32272	3 x 185	sm / 95	50,0	6383,0	7550,0	350 kcmil
32281	3 x 185	sm / 185	51,0	7363,0	8500,0	350 kcmil
32273	3 x 240	sm / 120	57,0	8242,0	9950,0	500 kcmil
32282	4 x 10	re / 10	20,5	504,0	890,0	8
32283	4 x 16	re / 16	23,5	796,0	1250,0	6
32284	4 x 25	rm / 16	28,0	1142,0	1800,0	4
32285	4 x 35	sm / 16	29,0	1526,0	2050,0	2
32286	4 x 50	sm / 25	33,0	2203,0	2700,0	1
32287	4 x 70	sm / 35	37,0	3082,0	3750,0	2/0
32288	4 x 95	sm / 50	43,5	4208,0	5000,0	3/0
32289	4 x 120	sm / 70	47,0	5388,0	6350,0	4/0
32290	4 x 150	sm / 70	51,0	6540,0	7650,0	300 kcmil
32291	4 x 185	sm / 95	56,0	8159,0	9350,0	350 kcmil
32292	4 x 240	sm / 120	62,5	10546,0	11600,0	500 kcmil