Productdetails | HELUKABEL SOUTH AFRICA

Back to overview

safety against high bending in drag chain systems, low torsion, halogen-free, meter marking, EMC-preferred type

Technical data

Special drag chain cables for high
mechanical stress adapted
to DIN VDE 0285-525-2-51 /
DIN EN 50525-2-51 and
DIN VDE 0285-525-2-21 /
DIN EN 50525-2-21
Temperature range
flexing -30°C to +80°C
fixed installation -40°C to +80°C
Nominal voltage
U₀/U 300/500 V
Test voltage
3000 V
Minimum bending radius
flexing 7,5x cable Ø
fixed installation 4x cable Ø
Coupling resistant
max. 250 Ohm/km
Radiation resistance
up to 100x10⁶ cJ/kg (up to 100 Mrad)

Cable structure

Bare copper conductor, fine wire,
Unilay with short lay length
Core insulation of special PP
Core identification black cores with
continuous white numbering
GN-YE conductor, 3 cores and above
Stranding:
< 7 cores: cores stranded in a layer with
optimal lay length around a filler as per
construction
≥ 7 cores: cores stranded with optimal
lay length to bunch-construction with
low torsion strength, optimal selected
short lay length around a filler
Special-TPE inner sheath, extruded as filler
with pressure, grey RAL 7001
Tinned copper braided screen,
coverage 85% max., with optimal pitch
Fleece separator, ensure good dismantling
ability
Outer sheath of special PUR
Sheath colour: black (RAL 9005)
With meter marking

Note

G = with GN-YE conductor
x = without GN-YE conductor (OZ)
AWG sizes are approximate equivalent
values. The actual cross section is in mm².
Unscreened analogue type:
MULTISPEED® 500-PUR

Application

For permanent application in drag chains for long distances, high and low speed of movements. These cables are installed in dry, moist and wet rooms and in open air with free movement without tensile stress or forced movements. These robust and abrasion resistant special control cables are installed there, where the problems appear for the application in permanent stresses e. g. in energy drag chains. These cables are installed everywhere, where high requirements for the flexibility, abrasion, oxygen and chemical resistance are necessary. These screened cables are particularly suitable for the interference-free transmission in instrumentation and control engineering applications. For applications which go beyond standard solutions we recommend for our especially developed enquiry sheet for energy guiding systems.
EMC = Electromagnetic compatibility
To optimize the EMC features we recommend a large round contact of the copper braiding on both ends.
CE = Product conforms with Low-Voltage Directive 2014/35/EU.

Downloads

Data sheet
Certificate of compliance

Part no.	No.cores x cross-sec. mm²	Outer Ø approx. mm	Cop. weight kg / km	Weight approx. kg / km	AWG-No.
24156	2 x 0,5	6,4	30,0	90,0	20
24157	3 G 0,5	6,7	36,0	104,0	20
24158	4 G 0,5	7,2	42,0	118,0	20
24159	5 G 0,5	7,6	48,0	148,0	20
24160	7 G 0,5	11,4	64,0	184,0	20
24161	9 G 0,5	11,4	80,0	219,0	20
24162	12 G 0,5	12,4	105,0	276,0	20
24163	18 G 0,5	14,7	137,0	378,0	20
24164	25 G 0,5	17,1	210,0	547,0	20
24165	2 x 0,75	6,8	40,0	100,0	19
24166	3 G 0,75	7,3	48,0	117,0	19
24167	4 G 0,75	7,8	55,0	143,0	19
24168	5 G 0,75	8,3	66,0	167,0	19
24169	7 G 0,75	12,7	85,0	229,0	19
24170	12 G 0,75	13,7	135,0	319,0	19
24171	18 G 0,75	17,1	190,0	492,0	19
24172	25 G 0,75	19,5	275,0	659,0	19
24173	2 x 1	7,1	50,0	120,0	18
24174	3 G 1	7,6	59,0	140,0	18
24175	4 G 1	8,1	70,0	167,0	18
24176	5 G 1	8,9	84,0	201,0	18
24177	7 G 1	13,6	106,0	256,0	18
24178	12 G 1	14,6	174,0	417,0	18
24179	18 G 1	18,4	240,0	557,0	18
24180	25 G 1	21,0	332,0	766,0	18
24181	3 G 1,5	8,4	75,0	170,0	16
24182	4 G 1,5	9,1	90,0	204,0	16
24183	5 G 1,5	10,2	108,0	236,0	16
24184	7 G 1,5	15,7	157,0	309,0	16
24185	12 G 1,5	17,4	240,0	509,0	16
24186	18 G 1,5	21,3	355,0	718,0	16
24187	25 G 1,5	24,3	448,0	944,0	16
24188	4 G 2,5	11,2	134,0	280,0	14
24189	5 G 2,5	12,2	175,0	346,0	14
24190	7 G 2,5	19,7	229,0	410,0	14