Productdetails | HELUKABEL SOUTH AFRICA

Back to overview

safety against high bending in drag chain systems, low torsion, halogen-free, meter marking

Technical data

Special drag chain cables for high
mechanical stress adapted to
DIN VDE 0285-525-2-51 /
DIN EN 50525-2-51 and
DIN VDE 0285-525-2-21 /
DIN EN 50525-2-21
Temperature range
flexing -30°C to +80°C
fixed installation -40°C to +80°C
Nominal voltage
U₀/U 300/500 V
Test voltage
3000 V
Insulation resistance
min. 100 MOhm x km
Minimum bending radius
flexing 7,5x cable Ø
fixed installation 4x cable Ø
Radiation resistance
up to 100x10⁶ cJ/kg (up to 100 Mrad)

Cable structure

Bare copper conductor, fine wire,
Unilay with short lay length
Core insulation of special PP
Core identification black cores with
continuous white numbering
GN-YE conductor, 3 cores and above
Stranding:
< 7 cores: cores stranded in a layer with
optimal lay length around a filler as per
construction
≥ 7 cores: cores stranded with optimal
lay length to bunch-construction with
low torsion strength, optimal selected
short lay length around a filler
Special-PUR outer sheath,
extruded as filler with pressure
Sheath colour: black (RAL 9005)
With meter marking

Note

G = with GN-YE conductor
x = without GN-YE conductor (OZ)
AWG sizes are approximate equivalent
values. The actual cross section is in mm².
Screened analogue type:
MULTISPEED® 500-C-PUR

Application

For permanent application in drag chains for long distances, high and low speed of movements. These cables are installed in dry, moist and wet rooms and in open air with free movement without tensile stress or forced movements. These robust and abrasion resistant special control cables are installed there, where the problems appear for the application in permanent stresses e. g. in energy drag chains, industry robotics, production lines, automatic control systems and permanent movable machinery parts for multi-shift operation. These cables are installed everywhere, where high requirements for the flexibility, abrasion, oxygen and chemical resistance are necessary. For applications which go beyond standard solutions we recommend for our especially developed enquiry sheet for energy guiding systems.
CE = Product conforms with Low-Voltage Directive 2014/35/EU.

Downloads

Data sheet
Certificate of compliance

Part no.	No.cores x cross-sec. mm²	Outer Ø approx. mm	Cop. weight kg / km	Weight approx. kg / km	AWG-No.
24119	2 x 0,5	4,3	9,6	41,0	20
24120	3 G 0,5	4,6	14,4	48,0	20
24121	4 G 0,5	5,0	19,0	62,0	20
24122	5 G 0,5	5,4	24,0	70,0	20
24123	7 G 0,5	8,9	33,6	88,0	20
24124	12 G 0,5	9,7	58,0	131,0	20
24125	18 G 0,5	11,8	86,0	204,0	20
24126	25 G 0,5	13,9	120,0	266,0	20
24127	3 G 0,75	5,2	21,6	51,0	19
24128	4 G 0,75	5,6	29,0	68,0	19
24129	5 G 0,75	6,3	36,0	73,0	19
24130	7 G 0,75	10,3	50,0	92,0	19
24131	12 G 0,75	11,0	86,0	170,0	19
24132	18 G 0,75	13,9	130,0	257,0	19
24133	25 G 0,75	15,9	180,0	280,0	19
24134	36 G 0,75	19,6	260,0	411,0	19
24135	42 G 0,75	21,5	302,0	608,0	19
24136	3 G 1	5,4	29,0	59,0	18
24137	4 G 1	5,9	38,0	71,0	18
24138	5 G 1	6,7	48,0	84,0	18
24139	7 G 1	11,1	67,0	111,0	18
24140	12 G 1	12,0	115,0	200,0	18
24141	18 G 1	14,8	173,0	286,0	18
24142	25 G 1	17,2	240,0	370,0	18
24143	3 G 1,5	6,4	43,0	81,0	16
24144	4 G 1,5	7,0	58,0	102,0	16
24145	5 G 1,5	7,8	72,0	121,0	16
24146	7 G 1,5	13,0	101,0	164,0	16
24147	12 G 1,5	14,2	173,0	293,0	16
24148	18 G 1,5	17,5	259,0	450,0	16
24149	25 G 1,5	20,1	360,0	631,0	16
24150	4 G 2,5	8,8	86,0	173,0	14
24151	5 G 2,5	9,8	120,0	220,0	14
24152	7 G 2,5	16,1	168,0	290,0	14
24153	12 G 2,5	17,8	288,0	504,0	14
24154	18 G 2,5	21,8	432,0	719,0	14
24155	25 G 2,5	24,4	600,0	940,0	14