| HELUKABEL Sverige

Back to overview

Silicone multicore cable, halogen-free, meter marking

Technical data

adapted to
DIN VDE 0285-525-2-83 /
DIN EN 50525-2-83
Temperature range
flexing -25°C to +180°C
fixed installation -60°C to +180°C
Nominal voltage U₀/U 300/500 V
Test voltage 2000 V
Insulation resistance
min. 200 MOhm x km
Minimum bending radius
flexing 7,5x cable Ø
fixed installation 4x cable Ø
Radiation resistance
up to 20x10⁶ cJ/kg (up to 20 Mrad)

Tests

Insulation integrity testet acc. to
DIN VDE 0472-814 / IEC 60331
Halogen free acc. to
DIN VDE 0482-267 /
DIN EN 50267-2-1 / IEC 60754-1
Behaviour in fire
no flame propagation acc. to
DIN VDE 0482-332-1-2 /
DIN EN 60332-1-2 / IEC 60332-1-2
Corrosiveness of combustion gases
acc. to DIN VDE 0482-267 /
DIN EN 50267-2-2 / IEC 60754-2

Cable structure

Tinned copper conductor, fine wire
acc. to DIN VDE 0295 cl.5 /
BS 6360 cl.5 / IEC 60228 cl.5
Core insulation of special silicone
compound type EI2 to
DIN VDE 0207-363-1 / DIN EN 50363-1
Core identification to DIN VDE 0293-308
- up to 5 cores coloured
- from 6 cores, black with continuous
white numbering
GN-YE conductor, 3 cores and above
in the outer layer
Cores stranded in layers with
optimal lay length
Outer sheath of special silicone
compound type 2GM1 to
DIN VDE 0207-363-2-1/DIN EN 50363-2-1
Sheath colour: black (RAL 9005)
With meter marking

Note

G = with GN-YE conductor
x = without GN-YE conductor
AWG sizes are approximate equivalent
values. The actual cross section is in mm².
EWKF = Improved values to
E=tearing resistance,
W=breaking strength propagation,
K=notch strength, F=flexibility
Screened analogue type:
THERMFLEX^® 180 EWKF-C

Application

These cables are ideal for use everywhere, where they are exposed to high mechanical stresses, as well as wire insulation are subjected to high temperatures. For use in dry, damp and wet rooms, as well outdoor. Silicone cables are halogen free and are suitable for use in air conditioning and heating, for lighting, for the wiring of ovens, saunas and solariums, foundries, steel, cement and ceramic works and in the heating and cooling equipment.
FRNC = Flame Retardant Non Corrosive
All silicone cables are available also in FRNC versions. The sheath designed with special-compound conform flame test method C to DIN VDE 0472-804 and IEC 60332-3 as well as HD 405.3. This special compound is self-extinguishing. Because of that these cables can be installed as security cable with functionality as for example in communal buildings, power stations, hotels, airports etc.
CE = Product conforms with Low-Voltage Directive 2014/35/EU.

Downloads

Data sheet
Certificate of compliance

Part no.	No.cores x cross-sec. mm²	Outer Ø approx. mm	Cop. weight kg / km	Weight approx. kg / km	AWG-No.
74992	2 x 0,75	6,4	15,0	53,0	19
74993	3 G 0,75	7,0	22,0	64,0	19
74994	4 G 0,75	7,6	29,0	84,0	19
74995	5 G 0,75	8,5	36,0	101,0	19
74996	2 x 1	6,8	20,0	60,0	18
74997	3 G 1	7,2	29,0	78,0	18
74998	4 G 1	7,8	39,0	95,0	18
74999	5 G 1	8,8	48,0	116,0	18
75000	2 x 1,5	8,8	29,0	82,0	16
75001	3 G 1,5	8,9	43,0	98,0	16
75002	4 G 1,5	9,9	58,0	122,0	16
75003	5 G 1,5	10,8	72,0	148,0	16
75004	7 G 1,5	12,0	101,0	187,0	16
75005	12 G 1,5	16,1	173,0	315,0	16
75006	16 G 1,5	18,2	231,0	446,0	16
75007	20 G 1,5	19,4	288,0	566,0	16
75008	2 G 2,5	9,8	48,0	135,0	14
75009	3 G 2,5	10,4	72,0	152,0	14
75010	4 G 2,5	11,5	96,0	189,0	14
75011	5 G 2,5	12,9	120,0	229,0	14
75012	2 x 4	11,6	77,0	180,0	12
75013	3 G 4	12,3	115,0	230,0	12
75014	4 G 4	13,6	154,0	300,0	12
75015	5 G 4	15,2	192,0	380,0	12
75016	2 x 6	13,2	115,0	321,0	10
75017	3 G 6	14,0	173,0	330,0	10
75018	4 G 6	15,5	230,0	430,0	10
75019	5 G 6	17,2	288,0	550,0	10