Back to overview

JE-H(St)HRH

Bd fire warning cable, FE 180/E 30 to E 90, halogen-free

Technical data

Special insulation for cores and outer
sheath adapted to DIN VDE 0815.
Loop resistance
max. 73,2 Ohm/km
Temperature range
flexing -5°C to +50°C
fixed installation -30°C to +70°C
Operating peak voltage max. 225 V
(not for heavy current installation purposes)
Test voltage
core/core 500 V
core/screen 2000 V
Insulation resistance
min. 100 MOhm x km
Mutual capacitance
max. 120 pF/m at 800 Hz
Minimum bending radius
6x cable Ø
Radiation resistance
up to 100x10⁶ cJ/kg (up to 100 Mrad)
Caloric load values
see "Technical Informations"

Cable structure

Bare copper conductor, single wire
Core insulation of cross-linked
polymer, compound type HI1 with
mica tape, flame retardant
Core identification with colour rings and
ring-groups to DIN VDE 0815
Cores twisted to pairs, each 4 pairs consist
to unit, several units stranded to layers
Units identified with numbered tape
Glass-fibre taped
Screening with alu-laminated polyester tape
solid copper drain wire 0,8 mm Ø
Inner sheath, flame retardant polyolefin
compound to DIN VDE 0207 part 24 HM3
Galvanized steel wire braided screen
Outer sheath of polyolefin
compound type HM2
to DIN VDE 0207 part 24
Outer sheath red (RAL 3000) with imprint
"BRANDMELDEKABEL"

Tests

Flame test acc. to
DIN VDE 0482-332-3, BS 4066 part 3,
DIN EN 60332-3, IEC 60332-3 (previously
DIN VDE 0472 part 804 test method C)
Corrosiveness of combustion gases
acc. to DIN VDE 0482 part 267,
DIN EN 50267-2-2, IEC 60754-2
(equivalent DIN VDE 0472 part 813)
Smoke density acc. to DIN VDE 0482
part 1034-1+2, DIN EN 61034-1+2,
IEC 61034-1+2, BS 7622 part 1+2
(previously DIN VDE 0472 part 816)

Properties

No fire propagation
Low smoke density
Not for purposes of high current
and power installation as well as
underground laying
FE 180: Insulation integrity for 180
minutes. Tests acc.to DIN VDE 0472
part 814 ≙ IEC 60331.
Insulation integrity under direct
flame propagation for the test period
of 180 minutes.
E 30: Functionality of electrical cable
systems for minimum 30 minutes. Test to
DIN 4102 part 12.
The functionality for 30 minutes assures
when persons and animals are to be saved
from a burning building. 30 minutes
secures the functional performance of the
fire warning and alarm systems, safety and
spare lighting, passenger lifts with
evacuation circuits, except the cables which
are installed within the ladder shafts and
engine rooms.
E 90: Functionality of electrical cable
systems for minimum 90 minutes. Test
method to DIN 4102 part 12.
The functionality for 90 minutes assures
the functional performance of
water-pressure-rising stations for the
supply to avoid smoke and heat in
safety-stairs and inner rooms, ladder shafts
and engine rooms for fire brigade lifts,
emergency lifts for sickbeds in hospitals
and the fire brigade lifts.

Note

E 30 to E 90
Functionality is dependant on installation
technique.
LS0H = Low Smoke Zero Halogen

Application

Wherever necessary to prevent high property value in case of fire damage to human and material. The static screen prevents strong interference impulse. Suitable for fixed installation everywhere, where in case of fire human life and material assets are to be protected and a safety conciousness take a special significance, e. g. in industrial complexes, public buildings, hotels, airports, under ground railway networks, hospitals.
CE = Product conforms with Low-Voltage Directive 2014/35/EU.

Downloads

Data sheet
Certificate of compliance

Part no.	No.pairs x cross-sec. mm	Outer Ø app. mm	Cop. weight kg / km	Weight app. kg / km
34075	2 x 2 x 0,8	11,7	25,0	150,0	-
34076	4 x 2 x 0,8	15,7	45,0	275,0	-
34077	8 x 2 x 0,8	21,6	85,0	545,0	-
34078	12 x 2 x 0,8	23,8	126,0	602,0	-
34079	16 x 2 x 0,8	27,7	166,0	734,0	-
34080	20 x 2 x 0,8	28,9	206,0	870,0	-
34072	32 x 2 x 0,8	41,1	326,0	1360,0	-
34073	40 x 2 x 0,8	42,3	407,0	1800,0	-
34074	52 x 2 x 0,8	45,2	529,0	2038,0	-