| HELUKABEL Sverige

Back to overview

flexible, screened, transparent, meter marking, EMC-preferred type

Technical data

PVC cable adapted to
DIN VDE 0285-525-2-51 /
DIN EN 50525-2-51
Temperature range
flexing -15°C to +80°C
fixed installation -40°C to +80°C
Nominal voltage
up to 1,5 mm² U₀/U 300/500 V
from 2,5 mm² U₀/U 450/750 V
Test voltage
4000 V
Breakdown voltage
min. 8000 V
Mutual capacitance
acc. to different cross sections
0,5 up to 2,5 mm²:
core/core approx. 150 pF/m
core/screen approx. 270 pF/m
Coupling resistance
max. 250 Ohm/km
Minimum bending radius
flexing 10x outer Ø
fixed installation 5x outer Ø

Cable structure

Bare copper conductor,
fine wire acc. to
DIN VDE 0295 cl.5 / IEC 60228 cl.5
Core insulation of PVC
compound type Z 7225
Core identification to JB/OB colour code
GN-YE conductor, 3 cores and above
in the outer layer
Cores stranded in layers with
optimal lay length
Inner sheath of PVC
Tinned copper braided screen,
approx. 85% coverage
Outer sheath of PVC
Sheath colour: transparent
With meter marking

Note

G = with GN-YE conductor
x = without GN-YE conductor (OB).
Up to 5 cores and cunductor cross section
up to 1,5 mm² with VDE REG-No.
The conductor is metrically constructed
(mm²). The AWG designation is
approximate and purely informative.
Unscreened analogue type:
JB-500
JB-750

Application

For use as connecting and control cable in machinery, computer systems etc. as well as a signal cable for electronics. The high level of screening ensures a high degree of interference protection. The screening density assures disturbance-free transmission of all signals and impulses. The PVC-inner sheaths of those cables raise the mechanical stress. The applied clear transparent PVC outer sheath accentuates the optical view of the tinned copper braid. These cables are suitable for flexible use for medium mechanical stresses with free movements. The dense screening assures disturbance-free transmission of all signals and impulses. An ideal disturbance-free control cable for the above application.
EMC = Electromagnetic compatibility
To optimize the EMC features we recommend a large round contact of the copper braiding on both ends.
CE = Product conforms with Low-Voltage Directive 2014/35/EU.

Downloads

Data sheet
Certificate of compliance

Part no.	No.cores x cross-sec. mm²	Outer Ø app. mm	Cop. weight kg / km	Weight app. kg / km	AWG-No.
16121	2 x 0,5	7,0	41,0	67,0	20
16122	3 G 0,5	7,5	45,0	83,0	20
16123	4 G 0,5	7,9	54,0	94,0	20
16124	5 G 0,5	8,6	66,0	108,0	20
16125	2 x 0,75	7,7	46,0	87,0	19
16126	3 G 0,75	8,0	57,0	98,0	19
16127	4 G 0,75	8,9	63,0	113,0	19
16128	5 G 0,75	9,5	76,0	130,0	19
16129	2 x 1	8,0	54,0	97,0	18
16130	3 G 1	8,6	64,0	103,0	18
16131	4 G 1	9,3	76,0	146,0	18
16132	5 G 1	9,9	89,0	169,0	18
16133	2 x 1,5	9,0	64,0	130,0	16
16134	3 G 1,5	9,4	82,0	152,0	16
16135	4 G 1,5	10,0	99,0	168,0	16
16136	5 G 1,5	10,9	123,0	202,0	16
16137	2 x 2,5	11,2	110,0	180,0	14
16138	3 G 2,5	12,2	148,0	216,0	14
16139	4 G 2,5	13,2	169,0	267,0	14
16140	5 G 2,5	14,4	220,0	347,0	14
16141	2 x 4	13,6	124,0	302,0	12
16142	3 G 4	14,3	178,0	340,0	12
16143	4 G 4	15,7	234,0	410,0	12
16144	5 G 4	17,2	284,0	502,0	12
16145	2 x 6	15,0	176,0	350,0	10
16146	3 G 6	16,2	245,0	450,0	10
16147	4 G 6	17,6	316,0	559,0	10
16148	5 G 6	19,4	442,0	702,0	10
16149	2 x 10	18,4	260,0	500,0	8
16150	3 G 10	19,8	367,0	750,0	8
16151	4 G 10	21,5	549,0	1020,0	8
16152	5 G 10	24,0	604,0	1115,0	8
16153	4 G 16	26,1	807,0	1380,0	6
16154	5 G 16	28,7	940,0	1553,0	6
16469	4 G 25	31,4	1169,0	1890,0	4
16155	5 G 25	34,9	1420,0	2270,0	4
16470	4 G 35	34,2	1680,0	2390,0	2
16156	5 G 35	38,2	2020,0	2885,0	2
16471	4 G 50	40,4	2370,0	3315,0	1
16119	5 G 50	44,6	2880,0	4150,0	1
16472	4 G 70	45,5	3257,0	4600,0	2/0
16473	4 G 95	51,7	4060,0	6060,0	3/0
16474	4 G 120	56,7	5231,0	7315,0	4/0
16247	4 G 150	62,9	7760,0	9340,0	300 kcmil
16319	4 G 185	69,0	8104,0	11120,0	350 kcmil