Back to overview

TOPFLEX^®-EMV-UV-2XSLCYK-J

for power supply connections to frequency converters, higher current carrying capacity, 0,6/1 kV,
double screened, meter marking

Technical data

Special motor power supply cable
for frequency converters
in reference to DIN VDE 0250
Temperature range
flexing -5°C to +90°C
fixed installation -40°C to +90°C
Permissible operating temperature
at conductor +90°C
Nominal voltage
U₀/U 600/1000 V
Max. permissible operating voltage
- 3-Phase and single phase
operation 700/1200 V
- DC operation 900/1800 V
Test voltage
4000 V
Coupling resistance
acc. to different cross sections
max. 250 Ohm/km
Minimum bending radius
flexing for cable Ø:
up to 12 mm: 10x outer Ø
> 12 mm: 15x outer Ø
fixed installation 4x outer Ø

Cable structure

Bare copper conductor, to
DIN VDE 0295 cl.5, fine wire,
BS 6360 cl.5, IEC 60228 cl.5
Core insulation of cross-linked
polyethylene (XLPE)
Core identification BN, BK, GY
GN-YE conductor
Cores stranded in concentric layers
1. Screen with special aluminium film
2. Tinned copper braided screen,
approx. 85% coverage
Outer sheath of special PVC
Sheath colour: black (RAL 9005)
With meter marking

Properties

Low mutual capacitance
Low coupling resistance for high
electromagnetic compatibility
UV-resitant
Outdoor application
This screened motor supply cable with
low mutual capacitance of the single cores
because of the special XLPE core insulation
and low screen capacitance enable a low-loss
transmission of the power compared to
PVC-sheathed connecting cables
Due to the optimal screening an
interference-free operation of
frequency converters is obtained
The materials used during manufacturing
are cadmium-free, contain no silicone
and are free from substances harmful
to the wetting properties of lacquers

Tests

Flame retardant acc. to
DIN VDE 0482-332-1-2 /
DIN EN 60332-1-2 / IEC 60332-1-2
Meets EMC requirements acc. to
EN 55011 and DIN VDE 0875-11

Note

^**) The current carrying capacity for
permanent operation at ambient temperature
of 30°C. For deviating ambient temperatures
the conversion factors should be used and
for further see the indication in
DIN VDE 0298-4.
The conductor is metrically constructed
(mm²). The AWG designation is
approximate and purely informative.

Application

As a supply and connecting cable for medium mechanical stresses in fixed installations and forced movements in dry, moist and wet environments and for outdoor applications, possible for installation in underground at 4G16 mm². Respecting the permissible operating temperature at the conductor of +90°C permits a higher current carrying capacity than PE insulated power distribution cables.Used in the automotive and food industries, environmental technology, packaging industry, chemical industry.
EMC = Electromagnetic compatibility
To optimize the EMC features we recommend a large round contact of the copper braiding on both ends.
CE = Product conforms with Low-Voltage Directive 2014/35/EU.

Downloads

Data sheet
Certificate of compliance

Part no.	No.cores x cross-sec. mm²	Outer Ø approx. mm	Mutual capacitance		Coupling resistance		Power ratings **) with 3 loaded cores in Amperes	Cop. weight kg / km	Weight approx. kg / km	AWG-No.
Part no.	No.cores x cross-sec. mm²	Outer Ø approx. mm	Core / Core approx. nF / km	Core / Screen approx. nF / km	at 1 MHz Ohm/km	at 30 MHz Ohm/km	Power ratings **) with 3 loaded cores in Amperes	Cop. weight kg / km	Weight approx. kg / km	AWG-No.
24489	4 G 1,5	10,1	70	110			23	95,0	230,0	16
24490	4 G 2,5	11,2	80	130	18	210	32	150,0	300,0	14
24491	4 G 4	12,8	90	150	11	210	42	235,0	485,0	12
24492	4 G 6	14,9	90	150	6	150	54	320,0	630,0	10
24493	4 G 10	17,7	120	200	7	180	75	533,0	860,0	8
24494	4 G 16	20,9	140	230	9	190	100	789,0	1290,0	6
24495	4 G 25	25,3	120	210	4	95	127	1236,0	1860,0	4
24496	4 G 35	28,0	150	260	3	85	158	1662,0	2610,0	2
24497	4 G 50	32,3	190	320	2	40	192	2345,0	2950,0	1
24498	4 G 70	37,6	190	320	2	45	246	3196,0	3950,0	2/0
24499	4 G 95	41,6	250	410	1	50	298	4316,0	5300,0	3/0
24500	4 G 120	44,8					346	5435,0	6600,0	4/0
24506	4 G 150	52,3					399	6394,0	7040,0	300 kcmil
24507	4 G 185	58,7					456	7639,0	8380,0	350 kcmil

TOPFLEX®-EMV-UV-2XSLCYK-J

for power supply connections to frequency converters, higher current carrying capacity, 0,6/1 kV,double screened, meter marking

TOPFLEX^®-EMV-UV-2XSLCYK-J

for power supply connections to frequency converters, higher current carrying capacity, 0,6/1 kV,
double screened, meter marking