Back to overview

JE-Y(St)Y

Bd Si industry-elektronic cable acc. to DIN VDE 0815

Technical data

Special industrial electronic cable to
DIN VDE 0815
Conductor resistance at 20°C
36,6 Ohm/km
Temperature range
flexing -5°C to +50°C
fixed installation -30°C to +70°C
Operating peak voltage 225 V
(not for heavy current installation purposes)
Test voltage
core/core 500 V
core/screen 2000 V
Insulation resistance
min. 100 MOhm x km
Mutual capacitance at 800 Hz
max. 100 pF/m
(this value may be exceeded by
20% with a make-up to 4 pairs)
Capacitance unbalance
max. 200 pF/100 m
Inductance
approx. 0,70 mH/km
Attenuation at 800 Hz
approx. 1,1 dB/km
Radiation resistance
up to 80x10⁶ cJ/kg (up to 80 Mrad)
Minimum bending radius
fixed installation 6x cable Ø
Caloric load values
see "Technical Informations"

Cable structure

Solid bare copper conductor wire 0,8 mm Ø
Core insulation of PVC
YI3, to DIN VDE 0207-4
Core identification (pair) to
DIN VDE 0815 (Simatic colour code)
Cores stranded in pairs with
optimal lay length
4 pairs stranded to a unit
Unit stranded with optimal lay length
Foil wrapping
Screening of plastic laminated foil
Copper drain-wire
Outer sheath of PVC
compound type YM1 to
DIN VDE 0207-5
Sheath colour grey (RAL 7032)
or blue (RAL 5015)

Properties

The materials used during manufacturing
are cadmium-free, contain no silicone
and are free from substances harmful
to the wetting properties of lacquers

Tests

PVC self-extinguishing and flame retardant
acc. to DIN VDE 0482-332-1-2 /
DIN EN 60332-1-2 / IEC 60332-1-2

Note

Also availabel in a halogen-free version.
(see also content "Halogen-free Security
Cables and Wires".
Control cable with blue outer sheath, see
Flexible Control Cables
Cables with blue sheath can be used for
the installation in explosive areas
including intrinsic safety -i-
acc. to DIN EN 60079-14 section 12.2.2
(VDE 0165-1)
2-paired cables:
cores stranded to a star quad

Application

These cable types are suitable for transmission of signals and measurements in the symmetric circuits of the control and regulation technology, and for the transmission of data and process information in computer systems. Used in dry and damp premises, and in or under plaster in the open air for fixed installation. Installation cables are not allowed for purposes of high current and power or burial installation.
CE = Product conforms with Low-Voltage Directive 2014/35/EU.

Downloads

Data sheet
Certificate of compliance

Part no.	No.pairs x cross-sec. mm	Sheath colour	Outer Ø approx. mm	Cop. weight kg / km	Weight approx. kg / km
48500	1 x 2 x 0,8	grey	5,0	20,0	43,0	-
48501	2 x 2 x 0,8	grey	6,6	25,0	60,0	-
48502	4 x 2 x 0,8	grey	8,3	45,0	95,0	-
48503	8 x 2 x 0,8	grey	10,5	85,0	157,0	-
48504	12 x 2 x 0,8	grey	11,8	126,0	224,0	-
48505	16 x 2 x 0,8	grey	13,5	166,0	290,0	-
48506	20 x 2 x 0,8	grey	14,7	206,0	350,0	-
48507	32 x 2 x 0,8	grey	19,0	327,0	545,0	-
48508	40 x 2 x 0,8	grey	20,7	407,0	660,0	-
48509	80 x 2 x 0,8	grey	29,5	809,0	1160,0	-
48519	1 x 2 x 0,8	blue	5,0	20,0	43,0	-
48520	2 x 2 x 0,8	blue	6,6	25,0	60,0	-
48521	4 x 2 x 0,8	blue	8,3	45,0	95,0	-
48522	8 x 2 x 0,8	blue	10,5	85,0	157,0	-
48523	12 x 2 x 0,8	blue	11,8	126,0	224,0	-
48524	16 x 2 x 0,8	blue	13,5	166,0	290,0	-
48525	20 x 2 x 0,8	blue	14,7	206,0	350,0	-
48526	32 x 2 x 0,8	blue	19,0	327,0	545,0	-
48527	40 x 2 x 0,8	blue	20,7	407,0	660,0	-
48528	80 x 2 x 0,8	blue	29,5	809,0	1160,0	-