| HELUKABEL ITALIA

Back to overview

high flexible, safety against high bending in drag chain systems, oil resistant, low torsion, screened, meter marking, EMC-preferred type

Technical data

Special drag chain cables for high
mechanical stress adapted to
DIN VDE 0285-525-2-51 /
DIN EN 50525-2-51
Temperature range
flexing -15°C to +80°C
fixed installation -30°C to +80°C
Nominal voltage
U₀/U 300/500 V
Test voltage
3000 V
Coupling resistance
max. 250 Ohm/km
Minimum bending radius
flexing 7.5x cable Ø
fixed installation 4x cable Ø

Cable structure

Bare copper conductor, fine wire,
Unilay with short lay length
Core insulation of special PP
Core identification black cores with
continuous white numbering
GN-YE conductor, 3 cores and above
Stranding:
< 7 cores: cores stranded in a layer with
optimal lay length around a filler as per
construction
≥ 7 cores: cores stranded with optimal
lay length to bunch-construction with
low torsion strength, optimal selected
short lay length around a filler
Special-PVC inner sheath YM2 extruded as
filler with pressure grey (RAL 7001)
Tinned copper braidet screen,
coverage 85% max., with optimal bunch
Fleece separator, ensure good dismantling
ability
Outer sheath of special PVC
especially resistant against fatigue strength
Sheath colour: black (RAL 9005)
With meter marking

Note

G = with GN-YE conductor
x = without GN-YE conductor (OZ)
AWG sizes are approximate equivalent
values. The actual cross section is in mm².
Unscreened analogue type:
MULTISPEED® 500-PVC

Application

HELUKABEL^® MULTISPEED 500-C-PVC are installed there, where the extreme requirements for the cables are necessary. The selected materials and lay-up technique permit these high flexible cables for permanent application in drag chains for long distances, high and low speed of movements. These high flexible PVC control cables are suitable for shift- and bending stresses in machines and machine tool constructions. These are installed in dry, moist rooms and in open air with free movement without tensile stress or forced movements. These screened cables are particularly suitable for the interference-free transmission in instrumentation and control engineering applications. For applications which go beyond standard solutions (for example for composting appliances or high shelf conveyors with extremely high processing speeds etc.) we recommend for our especially developed enquiry sheet for energy guiding systems. Before installation in cable trays please read the instructions. Further technical details see selection table for drag chain cables, see chapter "Technical Informations".
EMC = Electromagnetic compatibility
To optimize the EMC features we recommend a large round contact of the copper braiding on both ends.
CE = Product conforms with Low-Voltage Directive 2014/35/EU.

Downloads

Data sheet
Certificate of compliance

Part no.	No.cores x cross-sec. mm²	Outer Ø approx. mm	Cop. weight kg / km	Weight approx. kg / km	AWG-No.
24086	2 x 0,5	6,2	30,0	88,0	20
24087	3 G 0,5	6,7	36,0	101,0	20
24088	4 G 0,5	7,2	42,0	116,0	20
24089	5 G 0,5	7,6	48,0	146,0	20
24090	7 G 0,5	11,4	64,0	181,0	20
24091	9 G 0,5	11,4	80,0	219,0	20
24092	12 G 0,5	12,4	105,0	271,0	20
24093	18 G 0,5	14,7	137,0	374,0	20
24094	25 G 0,5	17,1	210,0	542,0	20
24095	2 x 0,75	6,8	40,0	96,0	19
24096	3 G 0,75	7,3	48,0	111,0	19
24097	4 G 0,75	7,8	55,0	140,0	19
24098	5 G 0,75	8,3	66,0	161,0	19
24099	7 G 0,75	12,7	85,0	227,0	19
24100	12 G 0,75	13,7	135,0	317,0	19
24101	18 G 0,75	17,1	190,0	486,0	19
24102	25 G 0,75	19,5	275,0	651,0	19
24103	3 G 1	7,6	59,0	131,0	18
24104	4 G 1	8,1	70,0	164,0	18
24105	5 G 1	8,9	84,0	198,0	18
24106	7 G 1	13,6	106,0	252,0	18
24107	12 G 1	14,6	174,0	410,0	18
24108	18 G 1	18,4	240,0	550,0	18
24109	25 G 1	21,0	332,0	756,0	17
24110	3 G 1,5	8,4	75,0	166,0	16
24111	4 G 1,5	9,1	90,0	199,0	16
24112	5 G 1,5	10,2	108,0	229,0	16
24113	7 G 1,5	15,7	157,0	304,0	16
24114	12 G 1,5	17,4	240,0	502,0	16
24115	18 G 1,5	21,3	355,0	709,0	16
24116	25 G 1,5	24,3	448,0	939,0	16
24117	4 G 2,5	11,2	134,0	270,0	14
24118	5 G 2,5	12,2	175,0	335,0	14