Back to overview

TROMMPUR^®-H

trailing, halogen-free

Technical data

Trailing cable acc. to
UL AWM Style 20235 CSA/AWM
Temperature range
flexing -40°C to +80°C
fixed installation -50°C to +80°C
Nominal voltage
DIN VDE 600/1000 V
UL 1000 V
A.c. test voltage, 50 Hz
core/core 4000 V
Insulation resistance
min. 20 MOhm x km
Speed of motion
up to 250 m/min
Minimum bending radius
6x cable Ø

Cable structure

Bare copper conductor, to
DIN VDE 0295 cl.6, extra fine wire,
BS 6360 cl.6, IEC 60228 cl.6
Core insulation of TPE
Core identification to DIN VDE 0293
- up to 5 cores coloured
- from 6 cores, black with continuous
white numbering
GN-YE conductor
Cores stranded around support element
Polyester fleece wrapping
Outer sheath of PUR
with integrated support braiding
Sheath colour: yellow

Properties

PUR outer sheath, low adhesion, abrasion
resistant, halogen-free, resistant to UV, oil,
hydrolysis and microbial attack
Due to the PUR outer sheath, the cable is
resistant against ozone and radiation, as well
as oils, greases and petrol

Note

AWG sizes are approximate equivalent
values. The actual cross section is in mm².

Application

Significantly smaller external diameters, smaller bending radii and reduced weights compared to NSHTÖU cables enable the use of smaller drive motors and drums, thus providing significant cost savings. Trailing cables are used for high mechanical stress, especially for applications with frequent winding and unwinding with simultaneous tensile and torsional stress, for building machinery, conveyors and lifting systems, and cranes. They are used as robust and all-weather resistant cables in the harshest operating environments in mining and in flexible handling equipment and railway motors. The cables are suitable for installation in dry, damp and wet environments, as well as outdoors.
Notes

During installation and operation the tensile stress on the cable must not exceed 25 N/mm²
Acceleration must not exceed 0,4 m/s²
1 to 2 turns should remain on the drum during operation

CE = Product conforms with Low-Voltage Directive 2014/35/EU.

Downloads

Data sheet

Part no.	No.cores x cross-sec. mm²	Outer Ø app. mm	Cop. weight kg / km	Weight app. kg / km	AWG-No.
77144	4 G 1,5	10,2	58,0	157,0	16
77145	5 G 1,5	10,8	72,0	176,0	16
77146	7 G 1,5	12,9	101,0	245,0	16
77147	12 G 1,5	18,4	173,0	337,0	16
77148	18 G 1,5	18,6	259,0	526,0	16
77149	24 G 1,5	21,3	345,6	662,0	16
77150	30 G 1,5	24,6	432,0	901,0	16
77151	42 G 1,5	26,5	604,8	1056,0	16
77152	4 G 2,5	11,7	96,0	208,0	14
77153	5 G 2,5	12,7	120,0	263,0	14
77154	7 G 2,5	14,8	168,0	327,0	14
77155	12 G 2,5	20,4	288,0	533,0	14
77156	18 G 2,5	21,1	432,0	725,0	14
77157	24 G 2,5	24,8	576,0	988,0	14

TROMMPUR®-H

trailing, halogen-free

TROMMPUR^®-H