Back to overview

N2XH

Power cable, 0.6/1 kV, halogen-free, without functionality

Technical data

Power and control cable
acc. to DIN VDE 0276-604 /
HD 604 S1-1+5G
Temperature range
during installation -5°C to +50°C
fixed installation -30°C to +90°C
Permissible conductor operating
temperature +90°C
Nominal voltage
U₀/U 0,6/1 kV
Test voltage
4 kV
Minimum bending radius
single-core 15x cable Ø
multi-core 12x cable Ø
Caloric load values
see "Technical Information"

Cable structure

Bare copper conductor,
single wire or multi wire acc. to
DIN VDE 0295 cl.1 or cl.2 /
IEC 60228 cl.1 or cl.2
Core insulation of cross-linked
polyethylene (XLPE)
compound type 2XI1
acc. to HD 604 S1
Core identification
acc. to DIN VDE 0293-308
Core identification for 3+½ conductor
J-type: GN-YE (½), BN, BK, GY
O-type: BU (½), BN, BK, GY
Cores stranded in layers
(for multi-core cables)
Overall filled inner sheath
Covered by filling compound or taping
Outer sheath of thermoplastic
polyolefin, compound type HM4
acc. to HD 604 S1
Sheath colour: black

Properties

Halogen free, no separation
of corrosive and toxic gases
Limited propagation of fire
Low smoke development
The materials used during manufacturing
are cadmium-free, contain no silicone
and are free from substances harmful
to the wetting properties of lacquers

Tests

Flame test acc. to
DIN VDE 0482-332-3-24
DIN EN 60332-3-24 / IEC 60332-3-24
Corrosiveness of combustion gases
acc. to DIN VDE 0482-267 /
DIN EN 50267-2-2 / IEC 60754-2
Halogen-free acc. to
DIN VDE 0482-267 /
DIN EN 50267-2-1 / IEC 60754-1
Smoke density acc. to
DIN VDE 0482-1034-1+2 /
DIN EN 61034-1+2 / IEC 61034-1+2

Note

re = round conductor, single-wire
rm = round conductor, multi-wire
sm = sectional conductor, mutli-wire
J-version = with GN-YE conductor
O-version = without GN-YE conductor
The conductor is metrically constructed
(mm²). The AWG designation is
approximate and purely informative.
LS0H = Low Smoke Zero Halogen

Application

Halogen-free power cables with enhanced characteristics in case of fire are used for applications where harm to human life and damage to property must be prevented in the event of fire, e. g. in power stations, industrial installations, communal establishments, hotels, airports, underground stations, railway stations, hospitals department stores, banks, schools theaters, multi-storey buildings, process control centres etc. Suitable for fixed installation in dry, damp or wet environments, in, above, on and beneath plaster as well as in masonary walls and in concrete. These cables are suitable for outdoor applications and in underground by using in conduits or tubes. For the installation in conduit all precautions must be taken that no accumulation of water can occur in the pipes.
CE = Product conforms with Low-Voltage Directive 2014/35/EU.

Downloads

Data sheet
Certificate of compliance

Part no.		No.cores x cross-sec. mm²	Outer Ø app. mm	Cop. weight kg / km	Weight app. kg / km	AWG-No.
J type	O type	No.cores x cross-sec. mm²	Outer Ø app. mm	Cop. weight kg / km	Weight app. kg / km	AWG-No.
	53558	1 x 1,5 rm	6,0	14,4	41,0	16
	53559	1 x 2,5 rm	6,5	24,0	53,0	14
53100	53248	1 x 4 re	8,0	39,0	68,0	12
53101	53249	1 x 6 re	9,0	58,0	90,0	10
53102	53250	1 x 10 re	9,0	96,0	140,0	8
53103	53251	1 x 16 re	10,0	154,0	190,0	6
53104	53252	1 x 25 rm	11,0	240,0	290,0	4
53105	53253	1 x 35 rm	12,0	336,0	390,0	2
53106	53254	1 x 50 rm	15,0	480,0	510,0	1