Back to overview

(N)HXH-FE 180/E 90

Security cable, halogen-free, 0.6/1 kV

Technical data

Halogen free security cable
in reference to DIN VDE 0266
Temperature range
during installation -5°C to +50°C
fixed installation -30°C to +90°C
Permissible operating temperature
at conductor +90°C
Nominal voltage
U₀/U 0.6/1 kV
Test voltage
4000 V
Minimum bending radius
single core 15x outer Ø
multi core 12x outer Ø
Caloric load values
see "Technical Information"

Cable structure

Bare copper conductor,
single wire or multi wire acc. to
DIN VDE 0295 cl.1 or cl.2 /
IEC 60228 cl.1 or cl.2
Core insulation of polymer
Core identification
acc. to DIN VDE 0293-308
1 core: black
≤ 5 cores: coloured
≥ 6 cores: black with continuous
white numbering
GN-YE conductor, 3 cores and above
Cores stranded in layer
Overall core covering
Core wrapping with glass-fibre
tape as flame-protection
Outer sheath of polyolefin
Sheath colour: orange

Tests

Flame test acc. to
DIN VDE 0482-332-3-24 /
DIN EN 60332-3-24 / IEC 60332-3-24
Corrosiveness of combustion gases
acc. to DIN VDE 0482-754-2 /
DIN EN 60754-2 / IEC 60754-2
Smoke density acc. to
DIN VDE 0482-1034-1+2 /
DIN EN 61034-1+2 / IEC 61034-1+2

Properties

Halogen-free
Flame retardant
Self-extinguished
No flame propagation
Low smoke density
FE 180: Insulation integrity
for 180 minutes. Tests acc. to
DIN VDE 0472-814 / IEC 60331
E 90: Functionality of electrical
cable systems for min. 90 minutes.
This fulfils the demands of technical
guide lines for fire protection
Test method acc. to DIN 4102-12
The functionality for 90 minutes
assures the functional performance
of water-pressure-rising stations for
the supply to avoid smoke and heat
in safety-stairs and inner rooms, ladder
shafts and engine rooms for fire brigade
lifts, emergency lifts for sickbeds in
hospitals and the fire brigade lifts.

Note

re = round conductor, single wire
rm = round conductor, multi wire
The conductor is metrically constructed
(mm²). The AWG designation is
approximate and purely informative.

Application

Wherever damage to people and material must be prevented in the event of a fire due to a high concentration of material assets. Suitable for permanent installation in dry, damp and wet rooms above, on, in and under plaster, as well as in masonry and concrete. They are also suitable for laying outdoors and in the ground when laying in pipes. Laying in the pipe is permitted if precautions have been taken to prevent water from building up in the pipe.
CE = Product conforms with Low-Voltage Directive 2014/35/EU.

Downloads

Data sheet
Certificate of compliance

Part no.	No.cores x cross-sec. mm²	Outer Ø app. mm	Cop. weight kg / km	Weight app. kg / km	AWG-No.
53180	1 x 16 rm	11,0	154,0	255,0	6
53181	1 x 25 rm	12,5	240,0	375,0	4
53182	1 x 35 rm	13,5	336,0	475,0	2
53183	1 x 50 rm	15,0	480,0	625,0	1
53184	1 x 70 rm	16,5	672,0	855,0	2/0
53185	1 x 95 rm	18,0	912,0	1140,0	3/0
53186	1 x 120 rm	20,5	1152,0	1410,0	4/0
53187	1 x 150 rm	22,5	1440,0	1730,0	300 kcmil
53188	1 x 185 rm	24,5	1776,0	2140,0	350 kcmil
53189	1 x 240 rm	27,0	2304,0	2700,0	500 kcmil
53190	1 x 300 rm	30,0	2880,0	3420,0	600 kcmil
53191	1 x 400 rm	33,5	3840,0	4310,0