Back to overview

HELUDATA® JE-LiYCY TP PVC GREY /
HELUDATA® JE-LiYCY TP PVC BLUE

Bd Si industry electronic cable

Technical data

Special industry electronic cable
adapted to DIN VDE 0815
Conductor resistance at 20°C
39,2 Ohm/km
Temperature range
flexing -5°C to +50°C
fixed installation -30°C to +70°C
Operating peak voltage 225 V
(not for heavy current installation purposes)
Test voltage
core/core 500 V
core/screen 2000 V
Mutual capacitance at 800 Hz
max. 100 pF/m
(this value may be exceeded by
20% with a make-up to 4 pairs)
Capacitance unbalance
max. 200 pF/100 m
Inductance
approx. 0,70 mH/km
Attenuation at 800 Hz
approx. 1,1 dB/km
Minimum bending radius
fixed installation 6x outer Ø

Cable structure

Bare copper strands 7x0,3 mm
Core insulation of PVC (Semi-Rigid-PVC)
Core identification (pair) to
DIN VDE 0815 (Simatic colour code)
Cores stranded in pairs with
optimal lay length
4 pairs stranded to a unit
Unit stranded with optimal lay length
Foil wrapping
Bare or tinned copper wire braided,
0,2 mm Ø screening,
approx. 85% coverage
Outer sheath of PVC
compound type YM1 to
DIN VDE 0207-5
Sheath colour: grey (RAL 7032)
or blue (RAL 5015)

Properties

Suitable for cut clamp technology
The materials used during manufacturing
are cadmium-free, contain no silicone
and are free from substances harmful
to the wetting properties of lacquers

Tests

Flame retardant acc. to
DIN VDE 0482-332-1-2 /
DIN EN 60332-1-2 / IEC 60332-1-2

Note

Also availabel in a halogen-free version.
(see also content "Halogen-free Security
Cables and Wires")
Control cable with blue outer sheath, see
Flexible Control Cables
With blue outer sheath for hazardous areas
to hazard type -i- for intrinsically safe
installation acc. to DIN EN 60079-14
section 12.2.2 (VDE 0165-1)
2-paired cables:
cores stranded to a star quad
For Maxi-Termi-Point^® technique
(Maxi-Termi-Point^® = registered trade
mark AMP)
The conductor is metrically constructed
(mm²). The AWG designation is
approximate and purely informative.

Application

These cable types are suitable for transmission of signals and measurements in the symmetric circuits of the control and regulation technology, and for the transmission of data and process information in computer systems. Used in dry and damp premises, and in or under plaster in the open air for fixed installation. Installation cables are not allowed for purposes of high current and power or burial installation.
EMC = Electromagnetic compatibility
To optimize the EMC features we recommend a large round contact of the copper braiding on both ends.
CE = Product conforms with Low-Voltage Directive 2014/35/EU.

Downloads

Data sheet
Certificate of compliance

Part no.	No.pairs x cross-sec. mm²	Sheath colour	Outer Ø approx. mm	Cop. weight kg / km	Weight approx. kg / km	AWG-No.
48510	2 x 2 x 0,5	grey	7,0	51,0	94,0	20
48511	4 x 2 x 0,5	grey	8,6	87,0	154,0	20
48512	8 x 2 x 0,5	grey	12,0	144,0	259,0	20
48513	12 x 2 x 0,5	grey	13,1	196,0	340,0	20
48514	16 x 2 x 0,5	grey	14,3	249,0	431,0	20
48515	20 x 2 x 0,5	grey	15,5	299,0	494,0	20
48516	24 x 2 x 0,5	grey	19,4	348,0	604,0	20
48517	32 x 2 x 0,5	grey	20,5	444,0	737,0	20
48518	40 x 2 x 0,5	grey	22,5	537,0	844,0	20
48529	2 x 2 x 0,5	blue	7,0	51,0	94,0	20
48530	4 x 2 x 0,5	blue	8,6	87,0

HELUDATA® JE-LiYCY TP PVC GREY / HELUDATA® JE-LiYCY TP PVC BLUE

Bd Si industry electronic cable

HELUDATA® JE-LiYCY TP PVC GREY /
HELUDATA® JE-LiYCY TP PVC BLUE