Back to overview

H07RN-F

rubber-sheathed cable

Technical data

Rubber sheathed cable H07RN-F to
DIN VDE 0285-525-2-21, BS 7919
DIN EN 50525-2-21, IEC 60245-4
Temperature range
flexing -25°C to +60°C
fixed installation -30°C to +60°C
Permissible conductor operating
temperature +60°C
Nominal voltage
U₀/U 450/750 V
in case of protected and fixed installation
U₀/U 600/1000 V
Max. permissible operating voltage
- 3-Phase and single phase
operation 476/825 V
- DC operation 619/1238 V
Test voltage
2500 V
Minimum bending radius
for fixed installation 4x outer Ø
for guiding over roller 7,5x outer Ø
during winding on drums 5x outer Ø

Cable structure

Bare copper conductor, to
DIN VDE 0295 cl.5, fine wire,
BS 6360 cl.5, IEC 60228 cl.5
Core insulation of rubber EI4 to
DIN VDE 0207-363-1 / DIN EN 50363-1
Core identification to DIN VDE 0293-308
- up to 5 cores coloured
- from 6 cores, black with continuous
white numbering
GN-YE conductor, 3 cores and above
Cores stranded in layers with
optimal lay length
Outer sheath of rubber EM2 to
DIN VDE 0207-363-2-1/DIN EN 50363-2-1
Sheath colour: black

Properties

Resistant to

Weather

Tests

Flame retardant acc. to
DIN VDE 0482-332-1-2 /
DIN EN 60332-1-2 / IEC 60332-1-2
Ozone resistant of the insulation to
DIN VDE 0473-396/DIN EN 50396
Oil resistant acc. to
DIN VDE 0473-811-404/DIN EN 60811-404

Note

G = with GN-YE conductor
x = without GN-YE conductor
The conductor is metrically constructed
(mm²). The AWG designation is
approximate and purely informative.
The core identification of a single core
sheathed, of an insulated wire is black.
In reference to VDE with
designation 07RN-F
- Part.-no. 37094, 19G1,5 mm²
- Part.-no. 37098, 19G2,5 mm²
- Part.-no. 34349, 5G120 mm²
- Part.-no. 34127, 5G150 mm²

Application

Heavy duty rubber-sheathed flexible cables are suited for use for medium mechanical stress in dry, damp and wet areas as well as in open air and in agriculture plants. They are used for equipment in industry works such as boilers, heating plates, hand lamps, electric tools such as drills, circular saws and homework tools as well as for transportable motors or machines at site. These cables are also suitable for fixed installation on plaster, in temporary buildings and residential barracks. They are suitable for direct laying on components and mechanical parts of machines, for example lifts and cranes. They can be used in case of protected and fixed installation in tubes or in equipment as well as rotor connecting cable of motors with a working voltage up to 1000 V alternating voltage or a direct voltage up to 750 V against ground.
CE = Product conforms with Low-Voltage Directive 2014/35/EU.

Downloads

Data sheet
Certificate of compliance

Part no.	No.cores x cross-sec. mm²	Outer Ø min. - max. mm	Cop. weight kg / km	Weight approx. kg / km	AWG-No.
37001	1 x 1,5	5,7 - 7,1	14,4	58,0	16
37002	1 x 2,5	6,3 - 7,9	24,0	71,0	14
37003	1 x 4	7,2 - 9,0	38,0	100,0	12
37004	1 x 6	7,9 - 9,8	58,0	130,0	10
37005	1 x 10	9,5 - 11,9	96,0	230,0	8
37006	1 x 16	10,8 - 13,4	154,0	290,0	6
37007	1 x 25	12,7 - 15,8	240,0	420,0	4
37008	1 x 35	14,3 - 17,9	336,0	530,0	2
37009	1 x 50	16,5 - 20,6	480,0	750,0	1
37010	1 x 70	18,6 - 23,3	672,0	960,0	2/0
37011	1 x 95	20,8 - 26,0	912,0	1250,0