Back to overview

N2XS2Y 6/10 kV, 12/20 kV, 18/30 kV

XLPE-insulated, Cu-conductor, single core, screened, PE-sheath

Technical data

XLPE-insulated power cables acc.to
DIN VDE 0276 part 620, HD 620 S2
and IEC 60502
Temperature range
during installation up to -20°C
Operating temperature
max. +90°C
Short circuit temperature
+250°C (short circuit duration max. 5 s)
Nominal voltage
U₀/U 6/10 kV, 12/20 kV, 18/30 kV
Operating voltage, 50 Hz
for 6/10 kV = max. 12 kV
for 12/20 kV = max. 24 kV
for 18/30 kV = max. 36 kV
Test voltage
for 6/10 kV = 21 kV
for 12/20 kV = 42 kV
for 18/30 kV = 63 kV
Minimum bending radius
15x cable Ø
Power rating
see "Technical Information"

Cable structure

Bare copper conductor, to
DIN VDE 0295 cl.2, multi-wire,
BS 6360 cl.2, IEC 60228 cl.2
Inner semi-conducting coating
Core insulation of cross-linked polyethylene
(XLPE), compound type DIX8 to HD 620 S2
Outer conductive layer extruded and per-
manently welded with the core insulation
Conductive wrapping
Screen: Braiding of copper wires with
one or two tapes applied helically
Wrapping
Outer sheath of PE
compound type DMP2 to HD 620 S2
Sheath colour: black

Properties

The materials used during manufacturing
are cadmium-free, contain no silicone
and are free from substances harmful
to the wetting properties of lacquers
Installation notes
To guarantee an optimum on operating
reliability the extruded semi-conductive
layer is spliced with the insulation for long
duration. For this reason we recommend
a peeling tool for installation

Note

rm = round conductor, multi-wire
Further dimensions available on request.
AWG sizes are approximate equivalent
values. The actual cross section is in mm².

Application

Suitable for indoor installation and in cable ducts, outdoors, underground and in water as well as for installation on cable trays for industries, switch-boards and power stations. The PE-outer sheath is resistant to high mechanical stress for laying the cables. This PE-sheath is not flame retardant acc. to DIN EN 60332-1-2. The inner conducting layer between the conductor and the XLPE insulation and the firmly bonded outer conducting layer on the XLPE insulation assures a construction free of partial discharges with high operational reliability.

Downloads

Data sheet
Certificate of compliance

Part no.	No.cores x cross-sec. mm²		Operation voltage max.	Nominal voltage kV	Insulation thickness mm	Sheath thickness Nominal value mm	Outer Ø min. - max. mm	Cop. weight kg / km	Weight app. kg / km	AWG-No.
32480	1 x 35	rm / 16	12	6 / 10	3,4	2,5	23,0 - 28,0	518,0	910,0	2
32481	1 x 50	rm / 16	12	6 / 10	3,4	2,5	24,0 - 29,0	662,0	990,0	1
32482	1 x 70	rm / 16	12	6 / 10	3,4	2,5	26,0 - 31,0	854,0	1205,0	2/0
32483	1 x 95	rm / 16	12	6 / 10	3,4	2,5	26,0 - 32,0	1098,0	1520,0	3/0
32484	1 x 120	rm / 16	12	6 / 10	3,4	2,5	28,0 - 34,0	1334,0	1760,0	4/0
32485	1 x 150	rm / 16	12	6 / 10	3,4	2,5	29,0 - 35,0	1622,0	2020,0	300 kcmil
32486	1 x 150	rm / 25	12	6 / 10	3,4	2,5	29,0 - 35,0	1725,0	2130,0	300 kcmil
32487	1 x 185	rm / 16	12	6