Back to overview

(H)03Z1Z1-F

halogen-free, meter marking

Technical data

flexible halogen free control cable
adapted to DIN VDE 0285-525-3-11 /
DIN EN 50525-3-11
Temperature range
flexing -5°C to +70°C
fixed installation -40°C to +70°C
Nominal voltage
U₀/U 300/300 V
Test voltage
2000 V
Breakdown voltage
min. 4000 V
Minimum bending radius
7,5x outer Ø

Cable structure

Bare copper conductor,
fine wire acc. to
DIN VDE 0295 cl.5 / IEC 60228 cl.5
Core insulation of thermoplastic
compound
Core identification to DIN VDE 0293-308
GN-YE conductor, 3 cores and above
Outer sheath of thermoplastic
compound
Sheath colour: by request
With meter marking

Properties

The materials used during manufacturing
are cadmium-free, contain no silicone
and are free from substances harmful
to the wetting properties of lacquers

Tests

Tested for flame retardation
acc. to DIN VDE 0482-332-1-2 /
DIN EN 60332-1-2 / IEC 60332-1-2
Smoke density acc. to
DIN VDE 0482-1034-1+2 /
DIN EN 61034-1+2 / IEC 61034-1+2
Halogen-free acc. to
DIN VDE 0285-525-1 / DIN EN 50525-1

Note

G = with GN-YE conductor
x = without GN-YE conductor
Please add the appropriate item number
when ordering using the following indicator:
0 = approx.RAL 9005 black
1 = approx.RAL 9003 withe
2 = approx.RAL 5015 blue
3 = approx.RAL 6018 green
4 = approx.RAL 8003 brown
5 = approx.RAL 1021 yellow
6 = approx.RAL 3000 red
7 = approx.RAL 2003 orange
8 = approx.RAL 4005 violet
9 = approx.RAL 7001/7032 grey
Further colours on request.
The conductor is metrically constructed
(mm²). The AWG designation is
approximate and purely informative.

Application

These cables may be used when halogen-free, low smoke and corrosive gas properties are required in case of fire. For low mechanical demands in the house, kitchen and office, for small equipment such as, for example, office machines, radios, table and stranded lamps.
Not suitable for cooking and heating equipment, use in high temperature areas (for example, in lighting equipment), outside use, industrial use or idustrial electrical tools, cables with a nominal cross section of 0,75 mm² comply with the same recommendations as for cable (H)05Z1Z1-F.
CE = Product conforms with Low-Voltage Directive 2014/35/EU.

Downloads

Data sheet
Certificate of compliance

Part no.	No.cores x cross-sec. mm²	Outer Ø approx. mm	Cop. weight kg / km	Weight approx. kg / km	AWG-No.
32330	2 x 0,5	5,0	9,6	39,0	20
32331	2 x 0,5	5,0	9,6	39,0	20
32332	2 x 0,5	5,0	9,6	39,0	20
32333	2 x 0,5	5,0	9,6	39,0	20
32334	2 x 0,5	5,0	9,6	39,0	20
32335	2 x 0,5	5,0	9,6	39,0	20
32336	2 x 0,5	5,0	9,6	39,0	20
32337	2 x 0,5	5,0	9,6	39,0	20
32338	2 x 0,5	5,0	9,6	39,0	20
32339	2 x 0,5	5,0	9,6	39,0	20
32340	3 G 0,5	5,3	14,4	46,0	20
32341	3 G 0,5	5,3	14,4	46,0	20
32342	3 G 0,5	5,3	14,4	46,0	20
32343	3 G 0,5	5,3	14,4	46,0	20