Back to overview

NEOPREN

flexible, colour or number coded with support organ

Technical data

Special rubber cable
in reference to DIN VDE 0250
Temperature range
flexing -25°C to +60°C
fixed installation -40°C to +80°C
Nominal voltage
U₀/U 300/500 V
Test voltage
3000 V
Minimum bending radius
for continuous bending without
forced guiding operation 12,5x outer Ø
for flexing with
forced guiding operation 20x outer Ø

Cable structure

Bare copper conductor, to
DIN VDE 0295 cl.6 col.4, extra fine wire,
BS 6360 cl.6, IEC 60228 cl.6
Core insulation of rubber
Core identification to DIN VDE 0293-308
- up to 5 cores coloured
- from 6 cores, black with continuous
white numbering
GN-YE conductor, 3 cores and above
Cores stranded in layers with
optimal lay length
Support organ (hemp or sisal-string etc.)
and/or taping with load carrying thread as
construction permits
Outer sheath of special rubber
Sheath colour: black

Properties

Extensively oil, flat and alkali resistant
Flame retardant

Note

G = with GN-YE conductor
x = without GN-YE conductor
The conductor is metrically constructed
(mm²). The AWG designation is
approximate and purely informative.
Not suitable for a winding up and an
unwinding on spring or motor cable reels.
Break resistance must be taken into
consideration.
By the assembly the cables must be
installed without torsion.
The mobility of the stranded core is
not be affected by using of clamps.
The occuring pulling forces are to be
carried by the support organ.

Application

As robust and weather resistant cable for machines, equipment and appliances, which are constantly exposed to the outdoor weather conditions (e. g. building machinery, conveyor and hoist systems, dry docks etc.). They are ideal for use as control cable in trailing cables. They are also suitable in dry, damp and wet rooms and in open air for wall- and push-button panels and as power cable.
CE = Product conforms with Low-Voltage Directive 2014/35/EU.

Downloads

Data sheet
Certificate of compliance

Part no.	No.cores x cross-sec. mm²	Outer Ø approx. mm	Tensile strength of susp. strand in N	Cop. weight kg / km	Weight approx. kg / km	AWG-No.
25001	2 x 1	7,5	300	19,0	90,0	18
25002	3 G 1	8,5	150	29,0	111,0	18
25003	4 G 1	9,7	300	38,0	141,0	18
25004	5 G 1	11,5	300	48,0	170,0	18
25005	6 G 1	13,4	-	58,0	187,0	18
25006	7 G 1	13,8	2290	67,0	204,0	18
25007	9 G 1	15,8	2890	86,0	274,0	18
25008	12 G 1	17,5	6740	115,0	389,0	18
25009	16 G 1	19,2	570	154,0	432,0	18
25010	18 G 1	21,5	960	173,0	471,0	18
25011	19 G 1	22,0	-	182,0	565,0	18
25012	20 G 1	22,4	600	192,0	590,0	18
25013	24 G 1	23,6	2890	230,0	650,0