Back to overview

TRONIC (LiYY)

flexible, colour coded to DIN 47100, meter marking

Technical data

Special-PVC data cables
in reference to DIN VDE 0812
Temperature range
flexing -5°C to +80°C
fixed installation -40°C to +80°C
Operating peak voltage
(not for heavy current installation purposes)
0,14 mm² 350 V
≥ 0,25 mm² 500 V
Test voltage
up to 0,25 mm² 1200 V
from 0,34 mm² 2000 V
Breakdown voltage
up to 0,25 mm² 2400 V
from 0,34 mm² 4000 V
Mutual capacitance at 800 Hz
0,14 mm² approx. 120 pF/m
0,25 mm² approx. 150 pF/m
Inductance
approx. 0,65 mH/km
Impedance
approx. 78 Ohm
Minimum bending radius
flexing 7,5x outer Ø
fixed installation 4x outer Ø

Cable structure

Bare copper conductor,
from 0,5 mm² fine wire acc. to
DIN VDE 0295 cl.5 / IEC 60228 cl.5
Conductor construction:
0,14 mm² approx. 18x0,1 mm
0,25 mm² approx. 14x0,15 mm
0,34 mm² = 7x0,25 mm
Core insulation of special PVC
compound type TI2 acc. to
DIN VDE 0207-363-3 / DIN EN 50363-3
Core identification in reference to
DIN 47100, without colour repetition
Cores stranded in layers with
optimal lay length
Outer sheath of special PVC
compound type TM2 acc. to
DIN VDE 0207-363-4-1/DIN EN 50363-4-1
Sheath colour: grey (RAL 7001)
With meter marking

Properties

Extensively oil resistant,
oil-/chemical resistance
see "Technical Information"
The materials used during manufacturing
are cadmium-free, contain no silicone
and are free from substances harmful
to the wetting properties of lacquers

Tests

Flame retardant acc. to
DIN VDE 0482-332-1-2 /
DIN EN 60332-1-2 / IEC 60332-1-2

Note

Also available in paired version, see
HELUKABEL^®-PAAR-TRONIC
The conductor is metrically constructed
(mm²). The AWG designation is
approximate and purely informative.
Screened analogue type:
TRONIC-CY (LiY-CY)

Application

These cables are used for flexible use with free movement without tensile stress or forced movements in dry, moist and wet rooms but not suitable for open air, wherever the construction requirements call for a minimum outer diameter, TRONIC is the suitable cable to use. This applies especially to such areas as tool making and machine industries as well as electronic, computer, measurement and control sectors.
CE = Product conforms with Low-Voltage Directive 2014/35/EU.

Downloads

Data sheet
Certificate of compliance

Part no.	No.cores x cross-sec. mm²	Outer Ø app. mm	Cop. weight kg / km	Weight app. kg / km	AWG-No.
18001	2 x 0,14	3,5	2,7	13,0	26
18002	3 x 0,14	3,7	4,0	16,0	26
18003	4 x 0,14	3,9	5,4	19,0	26
18004	5 x 0,14	4,3	6,7	22,0	26
18005	6 x 0,14	4,6	8,1	25,0	26
18006	7 x 0,14	4,6	9,4	28,0	26
18007	8 x 0,14	5,5	10,7	35,0	26
18008	10 x 0,14	5,9	13,4	41,0	26
18009	12 x 0,14	6,1	16,1	48,0	26
18010	14 x 0,14	6,3	18,8	53,0	26
18011	16 x 0,14	6,9	21,5	59,0	26
18012	18 x 0,14	7,2	24,2	65,0	26
18013	20 x 0,14	7,5