Back to overview

F-CY-OZ (LiY-CY)

flexible, screened, meter marking, EMC-preferred type

Technical data

Special-PVC cable in reference
to DIN VDE 0285-525-2-51 /
DIN EN 50525-2-51
Temperature range
flexing -10°C to +80°C
fixed installation -40°C to +80°C
Nominal voltage
U₀/U 300/500 V
Test voltage
core/core 4000 V
core/screen 2000 V
Breakdown voltage
min. 8000 V
Mutual capacitance
acc. to different cross sections
core/core approx.150 pF/m
core/screen approx 270 pF/m
Coupling resistance
max. 250 Ohm/km
Minimum bending radius
flexing 10x outer Ø
fixed installation 5x outer Ø

Cable structure

Bare copper conductor,
fine wire acc. to
DIN VDE 0295 cl.5 / IEC 60228 cl.5
Core insulation of special PVC
compound type Z 7225
Core identification to DIN VDE 0293
black cores with continuous white
numbering
Cores stranded in layers with
optimal lay length
Foil wrapping
- for 1-core (LiYDY)
   copper screen of helically wound,
   approx. 85% coverage
- from 2-cores
   tinned copper braided screening,
   approx. 85% coverage
Outer sheath of special PVC
compound type TM2 to
DIN VDE 0207-363-4-1/DIN EN 50363-4-1
Sheath colour: grey (RAL 7001)
With meter marking

Properties

Extensively oil resistant,
oil-/chemical resistance
see "Technical Information"
The materials used during manufacturing
are cadmium-free, contain no silicone
and are free from substances harmful
to the wetting properties of lacquers

Tests

Flame retardant acc. to
DIN VDE 0482-332-1-2 /
DIN EN 60332-1-2 / IEC 60332-1-2

Note

x = without GN-YE conductor (OZ)
Designation: LiYDY for 1-core cable
(without VDE REG-No.)
Cleanroom qualification tested with analog
type. Please note "cleanroom qualified"
when ordering.
The conductor is metrically constructed
(mm²). The AWG designation is
approximate and purely informative.
Unscreened analogue type:
JZ-500

Application

For flexible use with free movement without tensile stress or forced movements in dry, moist and wet rooms but not in open air, as connecting and control cable in the control and regulation technology, tool and machinery, in computer systems, as well as signal line in the electronic. A stabilizing foil separator between wire bound and braid reduces the outer diameter essentially and allows smaller bending radius, lower weight etc. The disturbance free transmission of signals and impulses is ensured due to the high degree of screening.
EMC = Electromagnetic compatibility
To optimize the EMC features we recommend a large round contact of the copper braiding on both ends.
CE = Product conforms with Low-Voltage Directive 2014/35/EU.

Downloads

Data sheet
Certificate of compliance

Part no.	No.cores x cross-sec. mm²	Outer Ø app. mm	Cop. weight kg / km	Weight app. kg / km	AWG-No.
16531	1 x 0,5	3,7	15,0	41,0	20
16532	2 x 0,5	5,7	35,0	45,0	20
16533	3 x 0,5	6,0	42,0	55,0	20
16534	4 x 0,5	6,5	47,0	61,0	20
16535	5 x 0,5	6,9	56,0	74,0	20
16536	6 x 0,5	7,6	67,0	89,0	20
16537	7 x 0,5	7,6	69,0	98,0	20
16538	8 x 0,5	8,4	80,0	117,0	20
16539	10 x 0,5	9,5	94,0	135,0	20
16540	12 x 0,5	9,8	108,0	157,0	20
16541	14 x 0,5	10,4	116,0