Back to overview

OZ-BL-CY

Outer sheath blue, flexible, meter marking, EMC-preferred type

Technical data

PVC cable in reference to
DIN VDE 0285-525-2-51 /
DIN EN 50525-2-51
Temperature range
flexing -10°C to +80°C
fixed installation -40°C to +80°C
Nominal voltage
U₀/U 300/500 V
Test voltage
3000 V
Breakdown voltage
min. 6000 V
Mutual capacitance at 800 Hz
core/core approx. 140 pF/m
core/screen approx. 187 pF/m
Inductance
approx. 0,68 mH/km
Coupling resistance
max. 250 Ohm/km
Minimum bending radius
flexing 10x outer Ø
fixed installation 5x outer Ø

Cable structure

Bare copper conductor,
fine wire acc. to
DIN VDE 0295 cl.5 / IEC 60228 cl.5
Core insulation of special PVC
compound type Z 7225
Core identification to DIN VDE 0293
black cores with continuous white
numbering
Without GN-YE conductor
Cores stranded in layers with
optimal lay length
Foil wrapping
Tinned copper braided screen,
approx. 85% coverage
Outer sheath of special PVC
compound type TM2 to
DIN VDE 0207-363-4-1/DIN EN 50363-4-1
Sheath colour: blue (RAL 5015)
With meter marking

Properties

Extensively oil resistant,
oil-/chemical resistance
see "Technical Information"
The materials used during manufacturing
are cadmium-free, contain no silicone
and are free from substances harmful
to the wetting properties of lacquers

Tests

Flame retardant acc. to
DIN VDE 0482-332-1-2 /
DIN EN 60332-1-2 / IEC 60332-1-2

Note

For installation in explosive areas
including intrinsic safety -i- acc. to
DIN EN 60079-14 / IEC 60079-14,
section 16.2.2 (VDE 0165-1)
Instrumentation cable RE-2Y(St)Yv with blue
outer sheath see Data and Computer cables.
The conductor is metrically constructed
(mm²). The AWG designation is
approximate and purely informative.

Application

These cables are appropriate for flexible use with medium mechanical stresses, and free movement without tensile stress or forced movements. For hazardous areas the cables with special marking (blue) (hazard type-i-) used as flexible control and measuring cables to meet the requirements for the installation of electrical apparatus. These installations are not earthed and require a separate power circuit. Those cables are not suitable for underground laying. The copper braided screening ensures the transmission of data signals and free from interference.
EMC = Electromagnetic compatibility
To optimize the EMC features we recommend a large round contact of the copper braiding on both ends.
CE = Product conforms with Low-Voltage Directive 2014/35/EU.

Downloads

Data sheet
Certificate of compliance

Part no.	No.cores x cross-sec. mm²	Outer Ø approx. mm	Cop. weight kg / km	Weight approx. kg / km	AWG-No.
14028	2 x 0,75	6,1	40,0	59,0	19
14029	3 x 0,75	6,3	52,0	66,0	19
14030	4 x 0,75	6,8	60,0	77,0	19
14031	5 x 0,75	7,4	71,0	93,0	19
14088	7 x 0,75	8,2	91,0	130,0	19
14032	8 x 0,75	9,0	110,0	145,0	19
14033	10 x 0,75	10,3	137,0	180,0	19
14034	12 x 0,75	10,5	142,0	202,0	19
14035	18 x 0,75	12,7	212,0	292,0	19
14036	20 x 0,75	13,6	238,0	362,0	19
14037	25 x 0,75	15,0	281,0	415,0	19
14038	30 x 0,75	16,0	320,0