Back to overview

JZ-HF-FCY

high flexible, cable for drag chains, oil resistant, EMC-preferred type, meter marking

Technical data

Special PVC drag chain cable, extreme
flexibility acc. to UL/CSA AWM I/II A/B
Style 2570
Temperature range
flexing -5°C to +80°C
fixed installation -40°C to +80°C
Nominal voltage
VDE U₀/U 300/500 V
UL/CSA 1000 V
Test voltage
4000 V
Breakdown voltage
min. 8000 V
Insulation resistance
min. 20 MOhm x km
Minimum bending radius
flexing 10x cable Ø
fixed installation 5x cable Ø
Coupling resistance
max. 250 Ohm/km
Radiation resistance
up to 80x10⁶ cJ/kg (up to 80 Mrad)

Cable structure

Bare copper, fine wire conductors, to
DIN VDE 0295 cl.5, BS 6360 cl.5
and IEC 60228 cl.5
Core insulation of special PVC
acc. to UL Std.1581
Core identification to DIN VDE 0293
black cores with continuous white
numbering
GN-YE conductor, 3 cores and above
in the outer layer
Cores stranded in layers with optimal
selected lay length
Separating foil over each layer
Construction with Cu-screening, tinned,
approx. 85%
Minimum coverage 85%
Outer sheath of special PVC
compound type TM5 to
DIN VDE 0207-363-4-1/DIN EN 50363-4-1
acc. to UL Std.1581
Sheath colour: grey (RAL 7001)
With meter marking

Properties

The materials used during manufacturing
are cadmium-free, contain no silicone
and are free from substances harmful
to the wetting properties of lacquers
low adhesion

Tests

PVC self-extinguishing and flame retardant
acc. to DIN VDE 0482-332-1-2 /
DIN EN 60332-1-2 / IEC 60332-1-2 /
UL VW-1 / CSA FT1
Oil resistant acc. to
DIN VDE 0473-811-404/DIN EN 60811-404

Note

G = with GN-YE conductor
x = without GN-YE conductor (OZ)
AWG sizes are approximate equivalent
values. The actual cross section is in mm².
Unscreened analouge type:
JZ-602 RC
MULTISPEED^® 500-PVC UL/CSA

Application

UL/CSA approved, highly flexible, screened PVC drag-chain cable for laying in dry, damp and wet rooms, with free movement and without tensile load or forced movements, suitable for frequent lifting and bending stresses in the sector of machine manufacture and tool making. Thanks to the high level of shielding density, a fault-free transmission of signals or impulses is ensured. The ideal control line, offering protection against interference, for the above applications. Of interest for those machinery manufacturers, who are export orientated. For applications which go beyond standard solutions (for example for composting appliances or high shelf conveyors with extremely high processing speeds etc.) we recommend for our especially developed enquiry sheet for energy guiding systems. Before installation in cable trays please read the instructions. Further technical details see selection table for drag chain cables, see chapter "Technical Informations".
EMC = Electromagnetic compatibility
To optimize the EMC features we recommend a large round contact of the copper braiding on both ends.
CE = Product conforms with Low-Voltage Directive 2014/35/EU.

Downloads

Data sheet

Part no.	No.cores x cross-sec. mm²	AWG-No.	Outer Ø app. mm	Cop. weight kg / km	Weight app. kg / km
12908	2 x 0,5	20	6,0	35,0	46,0
12909	3 G 0,5	20	6,3	42,0	56,0
12910	4 G 0,5	20	6,8	47,0	64,0
12911	5 G 0,5	20	7,4	56,0	77,0
12912	7 G 0,5	20	8,5	69,0	104,0
12913	12 G 0,5	20	10,1	108,0	158,0
12914	18 G 0,5	20	11,7	145,0	229,0
12915	25 G 0,5	20	14,0	240,0	320,0
12916	2 x 0,75	19	6,4	40,0	59,0
12917