Back to overview

TOPFLEX^®-EMV-UV-3 PLUS 2XSLCH-J

for power supply connections to frequency converters, 0,6/1 kV, halogen-free,
double screened, higher current carrying capacity, meter marking

Technical data

Special motor power supply cable
for frequency converters
in reference to DIN VDE 0250
Temperature range
flexing -15°C to +90°C
fixed installation -40°C to +90°C
Permissible operating temperature
at conductor +90°C
Nominal voltage
U₀/U 600/1000 V
Max. permissible operating voltage
- 3-Phase and single phase
operation 700/1200 V
- DC operation 900/1800 V
Test voltage
4000 V
Coupling resistance
acc. to different cross sections
max. 250 Ohm/km
Minimum bending radius
flexing for outer Ø:
up to 12 mm: 10x outer Ø
> 12-20 mm: 15x outer Ø
> 20 mm: 20x outer Ø
fixed installation for outer Ø:
up to 12 mm: 5x outer Ø
> 12-20 mm: 7,5x outer Ø
> 20 mm: 10x outer Ø

Cable structure

Bare copper conductor,
fine wire acc. to
DIN VDE 0295 cl.5 / IEC 60228 cl.5
Core insulation of cross-linked
polyethylene (XLPE)
Core identification BK, BN, GY
GN-YE conductor (divided into 3)
3+3 core design
Cores stranded in concentric layers
1. Screen with special aluminium film
2. Tinned copper braided screen,
approx. 85% coverage
Outer sheath special polyolefin compound
Sheath colour: black (RAL 9005)
With meter marking

Tests

Flame test acc. to
DIN VDE 0482-332-3-24 /
DIN EN 60332-3-24 / IEC 60332-3-24
Flame retardant acc. to
DIN VDE 0482-332-1-2 /
DIN EN 60332-1-2 / IEC 60332-1-2
Corrosiveness of combustion gases
acc. to DIN VDE 0482-754-2 /
DIN EN 60754-2 / IEC 60754-2
Smoke density acc. to
DIN VDE 0482-1034-1+2 /
DIN EN 61034-1+2 / IEC 61034-1+2
UV-resistant acc. to DIN EN ISO 4892-2
Meets EMC requirements acc. to
EN 55011 and DIN VDE 0875-11

Properties

Halogen-free
Low mutual capacitance
Low coupling resistance for high
electromagnetic compatibility
This screened motor supply cable with low
mutual capacitance of the single cores be-
cause of the special XLPE core insulation
and low screen capacitance enable a low-
loss transmission of the power
Due to the optimal screening an
interference-free operation of
frequency converters is obtained
The 3 PLUS-construction of motor power
supply cables features a symmetrical
3-core design, improved in terms of EMC
characteristics comparing favorably with a
4-core version. The protective conductor
PE, divided into 3 is uniformly stranded in
the interstices. This enables an extremely
concentric structure.
The minimum cross section of 0,75 mm²
meets the requirements of DIN EN 60204-1
The materials used during manufacturing
are cadmium-free, contain no silicone
and are free from substances harmful
to the wetting properties of lacquers

Note

^**) The current carrying capacity for
permanent operation at ambient temperature
of 30°C. For deviating ambient temperatures
the conversion factors should be used and
for further see the indication in
DIN VDE 0298-4.
The conductor is metrically constructed
(mm²). The AWG designation is
approximate and purely informative.

Application

As a supply and connecting cable for medium mechanical stresses in fixed installations and forced movements in dry, moist and wet environments and for outdoor applications. Respecting the permissible operating temperature at the conductor of +90°C permits a higher current carrying capacity than PE insulated power distribution cables. Used in the automobile industry, food industry, environmental engineering, packaging industry, toolmaking machinery, handling equipment, for SIMOVERT drivers, they are particularly suitable for use with industrial pumps, ventilators, conveyor belts and air-conditioning installations and similar applications.
EMC = Electromagnetic compatibility
To optimize the EMC features we recommend a large round contact of the copper braiding on both ends.
CE = Product conforms with Low-Voltage Directive 2014/35/EU.

Downloads

Data sheet
Certificate of compliance

Part no.	No.cores x cross-sec. mm²	Outer Ø app. mm	Coupling resistance		Power ratings **) with 3 loaded cores in Amperes	Cop. weight kg / km	Weight app. kg / km	AWG-No.
Part no.	No.cores x cross-sec. mm²	Outer Ø app. mm	at 1 MHz Ohm/km	at 30 MHz Ohm/km	Power ratings **) with 3 loaded cores in Amperes	Cop. weight kg / km	Weight app. kg / km	AWG-No.
24536	3 x 1,5 + 3 G 0,25	9,2			23	86,0	141,0	16
24537	3 x 2,5 + 3 G 0,5	10,8	18	210	32	144,0	213,0	14
24538	3 x 4 + 3 G 0,75	12,3	11	210	42	224,0	278,0	12
24539	3 x 6 + 3 G 1	14,0	6	150	54	298,0	377,0	10
24540	3 x 10 + 3 G 1,5	17,6	7	180	75	491,0	637,0	8
24541	3 x 16 + 3 G 2,5

TOPFLEX®-EMV-UV-3 PLUS 2XSLCH-J

for power supply connections to frequency converters, 0,6/1 kV, halogen-free,double screened, higher current carrying capacity, meter marking

TOPFLEX^®-EMV-UV-3 PLUS 2XSLCH-J

for power supply connections to frequency converters, 0,6/1 kV, halogen-free,
double screened, higher current carrying capacity, meter marking