| HELUKABEL Canada

Back to overview

Bd telephone-outdoor cable, acc. to DIN VDE 0816, laminated sheath, filled cable core, longitudinally water-proof

Technical data

acc. to DIN VDE 0816
Temperature range
flexible -20°C to +50°C
fixed installation to +70°C
Loop resistance at 20°C
0,6 mm = max. 130 Ohm/km
0,8 mm = max. 73,2 Ohm/km
Operating peak voltage max. 225 V
(not for heavy current installation purposes)
Test voltage
core/core U eff. 500²⁾ V
core/screen U eff. 2000 V
Insulation resistance
min. 1,5 GOhm x km
Line attenuation
of side circuits at 800 Hz
0,6 mm = 1,04 dB/km
0,8 mm = 0,78 dB/km
Impedance
of side circuites at 800 Hz
0,6 mm = 720 Ohm
0,8 mm = 520 Ohm
Minimum bending radius
10x cable Ø
Radiation resistance
up to 80x10⁶ cJ/kg (up to 80 Mrad)
Caloric load values
see "Technical Information"

Cable structure

Bare copper conductor, single-wire
Core insulation of PE (2Y)
Core identification of quads marked
with black rings
4 cores twisted to a star quad
5 star quads stranded to sub units,
each 5 or 10 sub units stranded to main
units and the sub or main units stranded
to cable core
Core cavities continuously filled
with petrol-jelly
Core wrapping with paper tape
Outer sheath, as laminated sheath (L)2Y,
PE-coated aluminium tape spliced with
PE (2Y) sheath
Sheath colour: black
Sheath marking continuously with
telephone-receiver, meter marking
in white colour

Note

¹⁾ But at least for 2 quads.
²⁾ Local cables with more than 100 pairs the
test conductor/conductor is emitted.
³⁾For cables up to 10 double cores is the
100 % value valid
Conductor Ø 0,4 mm on request.

Application

These external subscriber telephone cables are installed as telecommunication connection cable for connecting the telephone extension to the telephone exchange for transmitting signals. These subscriber connecting cables are suitable for laying in under ground, in cable ducts and cable conduits. According to DIN VDE 0800-1, these cables are allowed in all types of installation plants. The cavities of the cable core, filled continuously with viscous compound (F). Both sides of PE-copolymere coated aluminium type (L), which is spliced with the outer PE-sheath, ensures a barrier against water vapour and crosswise and longitudinal water tightness. Black coloured PE-sheath is UV-resistant. The Polyethelene material (PE 2Y) is halogen-free.
CE = Product conforms with Low-Voltage Directive 2014/35/EU.

Downloads

Data sheet
Certificate of compliance

Part no.	No.pairs x cross-sec. mm	Outer Ø approx. mm	Cop. weight kg / km	Weight approx. kg / km
34007	2 x 2 x 0,6	7,5	11,0	80,0	-
34008	4 x 2 x 0,6	9,0	23,0	140,0	-
34009	6 x 2 x 0,6	12,0	34,0	150,0	-
34010	10 x 2 x 0,6	13,5	57,0	190,0	-
34011	20 x 2 x 0,6	16,0	113,0	310,0	-
34012	30 x 2 x 0,6	19,0	170,0	430,0	-
34013	40 x 2 x 0,6	20,5	226,0	545,0	-
34014	50 x 2 x 0,6	23,0	283,0	660,0	-
34015	70 x 2 x 0,6	26,0	396,0	895,0	-
34016	100 x 2 x 0,6	31,5	565,0	1230,0	-
34017	150 x 2 x 0,6	37,5	848,0	1780,0	-
34018	200 x 2 x 0,6	42,5	1131,0	2320,0	-
34036	250 x 2 x 0,6	47,5	1414,0	2910,0	-
34037	300 x 2 x 0,6	51,5	1696,0	3490,0	-
34038	350 x 2 x 0,6	55,0	1979,0	3970,0	-
34039	400 x 2 x 0,6	60,5	2262,0	4480,0	-
34040	500 x 2 x 0,6	66,0	2827,0	5460,0	-
34029	2 x 2 x 0,8	8,5	20,0	100,0	-
34030	4 x 2 x 0,8	10,0	40,0	180,0	-
34019	6 x 2 x 0,8	8,5	60,0	190,0	-
34020	10 x 2 x 0,8	15,0	101,0	280,0	-
34021	20 x 2 x 0,8	19,0	201,0	480,0	-
34022	30 x 2 x 0,8	23,0	302,0	670,0	-
34023	40 x 2 x 0,8	26,0	402,0	860,0	-
34024	50 x 2 x 0,8	29,0	503,0	1060,0	-
34025	70 x 2 x 0,8	33,0	704,0	1420,0	-
34026	100 x 2 x 0,8	39,0	1005,0	1980,0	-
34027	150 x 2 x 0,8	47,0	1508,0	2940,0	-
34028	200 x 2 x 0,8	51,0	2011,0	3780,0	-
34031	250 x 2 x 0,8	58,0	2514,0	4660,0	-
34032	300 x 2 x 0,8	62,5	3016,0	5570,0	-
34033	350 x 2 x 0,8	68,0	3519,0	6750,0	-
34034	400 x 2 x 0,8	73,0	4022,0	7630,0	-
34035	500 x 2 x 0,8	81,5	5027,0	9540,0	-