Back to overview

PAAR-TRONIC-Li-2YCY

PE-insulated, low capacitance, Termi-Point^®, EMC-preferred type, meter marking

Technical data

PE-insulated data cable
Temperature range
flexing -5°C to +70°C
fixed installation -30°C to +80°C
Conductor resistance (loop) at 20°C
0,22 mm² max. 186 Ohm/km
0,34 mm² max. 115 Ohm/km
0,5 mm² max. 78,5 Ohm/km
Operating peak voltage max. 250 V
(not for heavy current installation purposes)
Test voltage
core/core 2000 V
core/screen 1000 V
Insulation resistance min. 5 GOhm x km
Mutual capacitance at 800 Hz
> 4 pairs max. 60 nF/km
≤ 4 pairs values extended by 20%
Inductance
approx. 0,66 mH/km
Line attenuation (approx. value)
0,22 mm² at 100 kHz 9,0 dB/km
0,34 mm² at 100 kHz 6,6 dB/km
0,50 mm² at 100 kHz 6,0 dB/km
0,22 mm² at 1 MHz 25,0 dB/km
0,34 mm² at 1 MHz 20,0 dB/km
0,50 mm² at 1 MHz 18,0 dB/km
Cross-talk attenuation
up to 1 MHz min. 50 dB
up to 10 MHz min. 40 dB
Minimum bending radius
flexing 12x cable Ø
fixed installation 7,5x cable Ø

Cable structure

Bare copper conductor, 7-wires, adapted to
DIN VDE 0881, suitable for Termi-Point®
and solder-free connection technique
Conductor construction:
0,22 mm² = 7x0,2 mm
0,34 mm² = 7x0,25 mm
0,5 mm² = 7x0,3 mm
Core insulation of PE
compound type L/MD to
DIN VDE 0819-103/DIN EN 50290-2-23
Core identification (pair) to DIN 47100
Cores stranded in pairs with
optimal lay-length
Pairs stranded in layers with
optimal lay-length
Foil wrapping
Tinned copper braided screen,
approx. 85% coverage
Outer sheath of special PVC
compound type TM2 to
DIN VDE 0207-363-4-1/DIN EN 50363-4-1
Sheath colour grey
with meter marking

Properties

These cables make enormous advantages
possible for fast and cost-effective
contact-making using the Termi-Point^®
connection technique. With this solder-free
connection technique, the stranded
conductor is crimped together with a
sleeve onto a contact pin without prior
stripping of the insulation material
The twisted-pair lay-up prevents electrical
unbalances within the cable and this thus
effectively suppresses cross-talking effects
The materials used in manufacture are
cadmium-free and contain no silicone
and free from substances harmful to
the wetting properties of lacquers

Tests

PVC outer sheath self-extinguishing and
flame retardant acc. to DIN VDE
0482-332-1-2,
DIN EN 60332-1-2, IEC 60332-1 (equivalent
DIN VDE 0472 part 804 test method B)

Note

At 0,22 mm² is designed for applications
with Sub-D connectors.
Termi-Point^® registered trade mark AMP.
AWG sizes are approximate equivalent
values. The actual cross-section is in mm².

Application

These PE-insulated data cables with twisted pairs are used in particular for the interference-free transmission of data and signals over longer distances. The high transmission rates are particularly suitable for RS 422 and RS 485 interfaces. These cables are suitable for fixed installations as well as for flexing applications, for free movement without forced motion and without tensile stress, in dry and moist environments but not in open air (Type grey).
EMC = Electromagnetic compatibillity
To optimize the EMC features we recommend a large round contact of the copper braiding on both ends.
CE = Product conforms with Low-Voltage Directive 2014/35/EU.

Downloads

Data sheet
Certificate of compliance

Part no.	No.pairs x cross-sec. mm²	Outer Ø approx. mm	Cop. weight kg / km	Weight approx. kg / km	AWG-No.
21111	2 x 2 x 0,22	5,5	26,0	48,0	24
21112	3 x 2 x 0,22	6,2	31,0	66,0	24
21113	4 x 2 x 0,22	6,5	38,0	82,0	24
21114	8 x 2 x 0,22	8,6	62,0	123,0	24
21115	10 x 2 x 0,22	9,9	79,0	165,0	24
21117	2 x 2 x 0,34	6,7	35,0	68,0	22
21118	3 x 2 x 0,34	7,2	44,0	77,0	22
21119	4 x 2 x 0,34	8,0	53,0	95,0	22
21120	8 x 2 x 0,34	10,9	86,0	158,0	22
21121	10 x 2 x 0,34	12,5	104,0	195,0	22
21123	2 x 2 x 0,5	7,9	49,0	74,0	20
21124	3 x 2 x 0,5	8,6	60,0	109,0	20
21125	4 x 2 x 0,5	9,6	73,0	128,0	20
21126	8 x 2 x 0,5	12,8	124,0	223,0	20
21127	10 x 2 x 0,5	14,8	155,0	265,0	20

PAAR-TRONIC-Li-2YCY

PE-insulated, low capacitance, Termi-Point®, EMC-preferred type, meter marking

PE-insulated, low capacitance, Termi-Point^®, EMC-preferred type, meter marking