JE-Y(St)Y

Bd Si industry-elektronic cable acc. to DIN VDE 0815

Logo Image
Produktfoto
Technical data
  • Special industrial electronic cable to
    DIN VDE 0815
  • Conductor resistance at 20°C
    36,6 Ohm/km
  • Temperature range
    flexing -5°C to +50°C
    fixed installation -30°C to +70°C
  • Operating peak voltage 225 V
    (not for purposes of high current and
    power installation)
  • Test voltage
    core/core 500 V
    core/screen 2000 V
  • Insulation resistance
    min. 100 MOhm x km
  • Mutual capacitance
    max. 100 pF/m (the value can exceed
    of 20% by cables up to 4 pairs)
  • Capacitance unbalance
    max. 200 pF/100 m
  • Inductance approx. 0,70 mH/km
  • Attenuation
    at 800 Hz approx. 1,1 dB/km
  • Radiation resistance
    up to 80x106 cJ/kg (up to 80 Mrad)
  • Minimum bending radius
    fixed installation 6x cable Ø
  • Caloric load values
    see table Technical Informations
Cable structure
  • Solid bare copper conductor wire 0,8 mm Ø
  • Core insulation of PVC
    YI3, to DIN VDE 0207 part 4
  • Core identification (pair) to
    DIN VDE 0815 (Simatic colour code)
  • Cores stranded in pairs with
    optimal lay length
  • 4 pairs stranded to a unit
  • Unit stranded with optimal lay length
  • Foil wrapping
  • Shielding of plastic laminated foil
  • Copper drain-wire
  • Outer sheath of PVC
    compound type YM1 to
    DIN VDE 0207 part 5
  • Sheath colour: grey (RAL 7032) or
    blue (RAL 5015)
Properties
  • The materials used during manufacturing
    are cadmium-free, contain no silicone
    and are free from substances harmful
    to the wetting properties of lacquers
Tests
  • PVC self-extinguishing and flame retardant
    acc. to DIN VDE 0482-332-1-2,
    DIN EN 60332-1-2, IEC 60332-1 (equivalent
    DIN VDE 0472 part 804 test method B)
Note
  • Also availabel in a halogen-free version.
    (see also content "Halogen-free Security
    Cables and Wires".
  • Control cable with blue outer sheath, see
    Flexible Control Cables
  • with blue outer sheath for hazardous areas
    to hazard type -i- for intrinsically safe
    installation acc. to DIN EN 60079-14
    section 12.2.2 (VDE 0165 part 1)
  • 2-paired cables:
    cores stranded to a star quad
Application
These cable types are suitable for transmission of signals and measurements in the symmetric circuits of the control and regulation technology, and for the transmission of data and process information in computer systems. Used in dry and damp premises, and in or under plaster in the open air for fixed installation. Installation cables are not allowed for purposes of high current and power or burial installation.
CE = Product conforms with Low-Voltage Directive 2014/35/EU.
Downloads
Data sheet
Certificate of compliance

Part no.

No.pairs x
cross-sec.
mm

Sheath
colour

Outer Ø

approx. mm

Cop.