NEOPREN Command Cable

flexible, colour or number coded with support organ

Logo Image
Produktfoto
Technical data
  • Special neoprene cable
    adapted to DIN VDE 0250
    with strain bearing support strand
  • Temperature range
    flexing -25°C to +60°C
    fixed installation -40°C to +80°C
  • Nominal voltage U0/U 300/500 V
  • Test voltage 3000 V
  • Minimum bending radius
    for continuous bending without forced
    guiding operation 12,5x cable Ø
    for flexing with forced guiding operation
    20x cable Ø
Cable structure
  • Bare copper conductor, to
    DIN VDE 0295 cl.6 col.4, extra fine wire,
    BS 6360 cl.6, IEC 60228 cl.6
  • Core insulation of rubber
  • Core identification to DIN VDE 0293-308
    - up to 5 cores coloured
    - from 6 cores, black with continuous
    white numbering
  • GN-YE conductor, 3 cores and above
  • Cores stranded in layers with
    optimal lay length
  • Support organ (hemp or sisal-string etc.),
    and/or taping with load carrying thread as
    construction permits
  • Outer sheath of neoprene
  • Sheath colour: black
  • The braking strength oft he carrying
    element is depending on the number
    of cores, the cross section of cores and
    the construction of cable.
Properties
  • Generally oil, flat and alkali resistant
Note
  • G = with green-yellow conductor
    x = without green-yellow conductor
  • AWG sizes are approximate equivalent
    values. The actual cross section is in mm².
  • Not suitable for a winding up and an
    unwinding on spring or motor cable reels.
  • Break resistance must be taken into
    consideration.
  • By the assembly the cables must be
    installed without torsion.
  • The mobility of the stranded core is
    not be affected by using of clamps.
  • The occuring pulling forces are to be
    carried by the support organ.
Application
As robust and weather resistant cable for machines, equipment and appliances, which are constantly exposed to the outdoor weather conditions (e. g. building machinery, conveyor and hoist systems, dry docks etc.). They are ideal for use as control cable in trailing cables. They are also suitable in dry, damp and wet areas for wall- and push-button panels and as power cable. The core insulation is ozone resistant and the outer sheath made of chloroprene is hardly flammable and abrasion resistant.
CE = Product conforms with Low-Voltage Directive 2014/35/EU.
Downloads
Data sheet
Certificate of compliance
<

Part no.

No.cores x
cross-sec.
mm²

Outer Ø

approx. mm

Tensile
strength
of susp.
strand in N

Cop.
weight

kg / km

Weight

approx. kg / km

AWG-No.

25001

2 x 1

7,5

300

19,0

90,0

18