halogen-free, flame retardant, oil-resistant, UV-resistant, flexible, meter marking

Logo Image Logo Image
Technical data
  • Halogen free flexible control cable to
    UL Style 20234, UL Std.758
  • Temperature range
    flexing -30°C to +80°C
    fixed installation -40°C to +80°C
  • Nominal voltage U0/U 600/1000 V
  • Test voltage 4000 V
  • Minimum bending radius
    flexing 10x cable Ø
    fixed installation 4x cable Ø
  • Flexibility
    Alternate bending test acc. to
    DIN VDE 0473-396 / DIN EN 50396
  • Coupling resistance
    max. 250 Ohm/km
Cable structure
  • Bare copper, fine wire conductors, to
    DIN VDE 0295 cl.5, BS 6360 cl.5 and
    IEC 60228 cl.5
  • Core insulation of halogen-free special
  • Core identification to DIN VDE 0293
    black cores with continuous white
  • GN-YE conductor, 3 cores and above
    in the outer layer
  • Cores stranded in layer with optimal
    lay length
  • Separating foil
  • Tinned copper braided screening,
    coverage approx. 85%
  • Outer sheath, halogen-free special polymer
  • Sheath colour: black (RAL 9005)
  • With meter marking
  • Halogen-free
  • Highly flame-retardant
  • Resistant to oils and greases
  • Resistant to UV and weathering
  • Flexible, abrasion- and wear-resistant
  • Ozone-resistant
  • Recycleable
  • Flame test acc. to DIN VDE 0482-332-3-24,
    BS 4066 part 3, DIN EN 60332-3-24,
    IEC 60332-3-24 (previously DIN VDE 0472
    part 804 test method C)
  • Self-extinguishing and flame retardant
    acc. to DIN VDE 0482-332-1-2,
    DIN EN 60332-1-2/IEC 60332-1 (previously
    DIN VDE 0472 part 804 test method B)
  • The materials used during manufacturing
    are cadmium-free, contain no silicone
    and are free from substances harmful
    to the wetting properties of lacquers
  • Corrosiveness of combustion gases
    acc. to NF X 10-702
  • Halogen-free acc. to DIN VDE 0482
    part 267/ EN 50267-2-1/ IEC 60754-1
    (equivalent DIN VDE 0472 part 815)
  • Smoke density acc. to DIN VDE 0482
    part 1034-1+2, DIN EN 61034-1+2/
    IEC 61034-1+2, BS 7622 part 1+2
    (previously DIN VDE 0472 part 816)
  • Oil-resistant to
    DIN VDE 0473-811-404/DIN EN 60811-404
  • hydrolysebeständig nach DIN EN 61234-1
  • Ozone-resistant to
    DIN VDE 0473-811-403/DIN EN 60811-403
  • G = with green-yellow conductor
    x = without green-yellow conductor
  • unscreened analogue type:
    MEGAFLEX® 600
For fixed installation or flexible application, with occasional not permanently recurring free movement without forced motionand without tensile stress, for high mechanical strain. As a measuring and control cable in tool machinery, conveyor belts and production lines, plant engineering, climate engineering,in foundries and steel mills. Especially suited for wind power plant and computer equipment.
EMC = Electromagnetic compatibility
To optimize the EMC features we recommend a large round contact of the copper braiding on both ends.
CE = Product conforms with Low-Voltage Directive 2014/35/EU.