high flexible, safety against high bending in drag chain systems, oil resistant, low torsion, screened, EMC-preferred type, meter marking

Logo Image Logo Image Logo Image
Technical data
  • Special drag chain cables for high
    mechanical stress in accordance to
    DIN VDE 0285-525-2-51/DIN EN 50525-2-51
    and UL Std.758 AWM Style 21179
  • Temperature range
    flexing -5°C to +80°C
    fixed installation -30°C to +80°C
  • Nominal voltage
    VDE U0/U 300/500 V
    UL 600 V
  • Test voltage 3000 V
  • Insulation resistance
    min. 100 MOhm x km
  • Minimum bending radius
    flexing 7,5x cable Ø
    fixed installation 4x cable Ø
  • Coupling resistance
    max. 250 Ohm x km
  • Radiation resistance
    up to 80x106 cJ/kg (up to 80 Mrad)
Cable structure
  • Bare copper, fine wire conductors,
    Unilay with short pitch length
  • Core insulation of Special PP
  • Core identification to DIN VDE 0293
    black cores with continuous white
  • GN-YE conductor, 3 cores and above
  • Stranding:
    <7 cores: with optimal lay length,
    construction due to a filling element, in a
    stranded position
    ≥7 cores: cores stranded with optimal
    lay length to bunch-construction with low
    torsion strength, optimal selected short
    lay length around a filler
  • Special PVC inner sheath YM2 gusset-filling
    extruded, grey (RAL 7001)
  • Braid of tinned copper wires, minimum
    coverage 85% max. with optimal braiding
  • Outer sheath of special PVC
    especially fatigue resistant
  • sheath colour black (RAL 9005)
  • With meter marking
  • The materials used during manufacturing
    are cadmium-free, contain no silicone
    and are free from substances harmful
    to the wetting properties of lacquers
  • PVC self-extinguishing and flame retardant
    acc. to DIN VDE 0482-332-1-2,
    DIN EN 60332-1-2, IEC 60332-1 (equivalent
    DIN VDE 0472 part 804
    test method B), UL VW-1, CSA FT1
  • Low adhesion
  • Ozon and UV resistant
  • High property of alternating bending
  • longer service life due to low
    friction resistance
  • Better chemical resistance
  • Oil resistance to DIN VDE 0473-811-404/
    DIN EN 60811-404
  • Higher stability
  • Higher economical solution
  • Reduced Ø, therefore less moving masses
  • G = with green-yellow conductor
    x = without green-yellow conductor (OZ)
  • AWG sizes are approximate equivalent
    values. The actual cross section is in mm².
  • unscreened analogue type:
For permanently use on long distances, and high or low speeds. These high flexible PVC control cables are suitable for shift- and bending stresses in machines and machine tool constructions. These are installed in dry, moist rooms and in open air with free movement without tensile stress or forced movements. These screened cables are particularly suitable for the interference-free transmission in instrumentation and control engineering applications. For applications which go beyond standard solutions we recommend for our especially developed enquiry sheet for energy guiding systems. Before installation in cable trays please read the instructions. Further technical details see selection table for drag chain cables, see lead text.
EMC = Electromagnetic compatibility
To optimize the EMC features we recommend a large round contact of the copper braiding on both ends.
CE = Product conforms with Low-Voltage Directive 2014/35/EU.
Data sheet
Certificate of compliance

Part no.

No.cores x


Outer Ø

app. mm


kg / km


app. kg / km