flexible, cross-linked, halogen-free, screened, EMC-preferred type

Logo Image Logo Image
Technical data
  • Temperature-resistant and halogen-free
    connection and control cable
  • Temperature range
    flexing -35°C to +120°C
    fixed installation -55°C to +145°C
    in short-circuit +250°C
  • Nominal voltage
    up to 1,0 mm² U0/U 300/500 V
    from 1,5 mm² U0/U 450/750 V
    with protected fixed installation
    from 1,5 mm² U0/U 600/1000 V
  • Test voltage
    3000 V
  • Minimum bending radius
    in operation 8x cable Ø
    fixed installation 4x cable Ø
  • Coupling resistance
    max. 250 Ohm/km
  • Caloric load values
    see "Technical Informations"
  • Power ratings table
    see "Technical Informations"
  • Approval
    Germanischer Lloyd
Cable structure
  • Tinned copper conductor, to
    DIN VDE 0295 cl.5, fine wire,
    BS 6360 cl.5, IEC 60228 cl.5
  • Core insulation of cross-linked,
    halogen-free polyolefin-copolymer
  • Core identification black cores with
    continuous white numbering
  • Cores stranded in layers with
    optimal lay length
  • Tinned copper braided screen,
    approx. 85% coverage
  • Outer sheath of cross-linked,
    halogen-free polyolefin-copolymer
  • Sheath colour: black
  • With meter marking
  • Lower propagation of fire
  • Low development of smoke and fumes
  • Good abrasion and notch resistance
  • Good resistance to oils and weathering
  • Resistant to UV radiation and ozone
  • Resistant to soldering temperatures
  • Thermal class B
  • These control cables are resistant to
    melting, even when in contact with a
    soldering iron at temperatures of between
    300°C and 380°C, because of the
    cross-linking for the insulation material
  • The materials used during manufacturing
    are cadmium-free, contain no silicone
    and are free from substances harmful
    to the wetting properties of lacquers
  • Flame test (unit flame test) acc. to
    DIN VDE 0482-332-3-22, BS 4066 Teil 3,
    DIN EN 60332-3-22, IEC 60332-3-22
    (previously DIN VDE 0472
    part 804 test method C)
  • Flame test (cable) acc. to
    DIN VDE 0482-332-1-2, DIN EN 60332-1-2,
    IEC 60332-1-2 (equivalent DIN VDE 0472
    part 804 test method B)
  • Corrosiveness of combustion gases
    acc. to DIN VDE 0482 part 267,
    DIN EN 50267-2-2, IEC 60754-2
    (equivalent DIN VDE 0472 part 813)
  • Halogen-free
    acc. to DIN VDE 0482 part 267,
    DIN EN 50267-2-1, IEC 60754-1
    (equivalent DIN VDE 0472 part 815)
  • Smoke density
    acc. to DIN VDE 0482 part 1034-1+2,
    DIN EN 61034-1+2, IEC 61034-1+2,
    BS 7622 part 1+2
    (previously DIN VDE 0472 part 816)
  • Also available in other colours on request
  • AWG sizes are approximate equivalent
    values. The actual cross section is in mm².
  • Unscreened analogue type:
These halogen-free, cross-linked and temperature resistant wiring and control cables with enhanced fire-behaviour properties are used for wiring up the lighting fixtures, heaters, electric machines (temperature class B), switching systems and distribution switchboards. A very long service life is also given on account of their excellent high-temperature stability. These cables exhibit good resistance to weathering as well as being very stable to temperature, moisture, ozone and UV radiation. These cables are therfore mainly used for traffic control systems and diverse outdoor applications. The development of smoke is low and no corrosive gases are liberated during combustion of these halogen-free cables in case of fire. The risk of toxic fumes is considerably less in the event of fire because the coloric load values is lower. Precious time can thus be won for a disciplined evacuation, and unnecessary loss of life can be prevented. The extent of the damage to costly control and monitoring systems and the concrete and steel structures of buildings and plant due to fire is reduced by this. Injuries to persons and damage to materials can be prevented. A lower conductor cross section is possible in certain circumstances because of the high thermal load and thus savings in the space and weight required can be made. These wiring and control cables provide a significant contribution in safety engineering and environmental protection.
EMC = Electromagnetic compatibility
To optimize the EMC features we recommend a large round contact of the copper braiding on both ends.
CE = Product conforms with Low-Voltage Directive 2014/35/EU.