Back to overview

HELUWIND^® WK 310-Torsion

1,8/3 kV, UV resistant

Technical data

Temperature range
flexing -40°C to +90°C
fixed installation -40°C to +90°C
Permissible conductor operating
temperature +90°C
Nominal voltage
VDE U₀/U 1,8/3 kV
Test voltage
9000 V
Minimum bending radius
flexing 10x cable Ø
fixed installation 5x cable Ø
Torsion application
+/- 150° per 1m
Flame test
IEC 60332-3
Halogen-free
IEC 60754-1
Smoke density
IEC 61034-1+2
Oil test
acc. to oil res II

Cable structure

Special bare copper conductor,
fine stranded acc. to IEC 60228
Special insulation black
Sheath: compound low adhesion
Sheath colour: black

Properties

Halogen-free
Extremely abrasion resistant
Low adhesion
High flame retardant
Torsion tested
Extremely oil resistant
UV resistant
Recyclable
Multi-climate operation
Designed for CCV application
Easy to assemble

Note

For more information, especially on
custom cables, please contact us:
wind@helukabel.de

Application

The WK 310-Torsion has been designed for flexible use, and specifically for torsional load in the cable loop of a wind power plant. The WK series has been successfully tested for more than 18,000 torsion cycles and thus offers optimum operational reliability far beyond the service life of the wind power plant. Another special feature is the higher voltage level of 1.8/3 kV. The WK 310-Torsion can be used instead of the WK 305.

Downloads

Data sheet

Part no.	No.cores x cross-sec. mm²	Outer Ø app. mm	Cop. weight kg / km	Weight app. kg / km	AWG-No.
706452	1 x 50	15,0	480,0	660,0	-
706453	1 x 70	20,0	672,0	920,0	-
706454	1 x 95	23,8	912,0	1300,0	-
706455	1 x 120	26,3	1152,0	1600,0	-
706456	1 x 150	29,2	1440,0	1990,0	-
706457	1 x 185	31,4	1776,0	2430,0	-
706458	1 x 240	34,4	2304,0	3280,0	-
706459	1 x 300	36,9	2880,0	3960,0	-
706460	1 x 400	41,5	3840,0	4800,0	-

HELUWIND® WK 310-Torsion

1,8/3 kV, UV resistant

HELUWIND^® WK 310-Torsion